801-0028

This is my second set. Very well made nice finish and easy install. Highly recommend

I can confirm these mirrors fit a 2024 husqvarna 401 svartpilen with no significant modification. These mirrors come with several adapters to ensure they fit a wide range of motorcycles. The mirrors mount securely without any significant vibration even at higher speeds (which is notable since my bike is a "thumper," i.e., single cylinder motor). The powder coating is good quality as is the mirror itself. It does, in my opinion, notably improve the bike's aesthetics and looks like it could be factory/OEM. Keep in mind, you'll probably want to fill in the bolt holes that will be open once you remove the stock mirrors (they sell inserts, but I just used some new bolts I had laying around which I painted black to match my handlebars).

Perfect fit for a svartpilen 401 2025 great field of view while driving very sturdy so it not get affected for the vibrations

Okay, so Im rather impressed with these mirrors so far (a few hundred miles into installation). They came well packaged, finish looks good with plenty of extra shims and bolts, and the blue tint really does keep the glare to a minimum. The mirrors really are tight, and didn't vibrate or get wind bent out of position after a long highway haul. Installed easily onto my 1977 CB 550K with 7/8 inch bars, but there are a few things folks may want to consider, after reading through the other reviews: 1) Run the bolts through the threads once or twice. Mine had material in the threads that needed to be worked out prior to install. 2) Make sure the expansion sleeves are orientated correctly - with the splits on the cone end! Mine were reversed, but two seconds of looking things over fixed that. 3) Get the cone started prior to putting in the bar ends. 4) Loctite those bolts down! My only gripe about these mirrors is the flatness of the mirror. They ARE NOT convex lenses and they don't provide a good field of rear view at all. It doesn't bother me much with my setup, just a little self adjustment on my mirror search, but if your used to wide angle mirrors, these will be a real change. rubber side down kids

I was pleasantly surprised with these mirrors. They fit well and haven't come loose in the 1500+ miles I've ridden since installing these. Great value and clear glass. They also stay in place at higher speeds which my previous mirrors did not.

Gave these a shot but they don't hold their position. Had to keep adjusting at every light. Thankfully they're easy to put on and take off. If you plan on going more than 60 mph these won't work.

Fyi for those looking through what bike, installed this on a Honda CB300R, in short doesn't fit on bar end, did not want to use the adapter caps so I had to get crafty. These look great and was nice minus the constant vibration on the reflection and the poor fitting on my bike. For those of you with a Honda CB300R that do not want to sacrifice their bar end as the part does not fit anywhere close to it you will have to shave and take a good several hours depending on what tools you have to make these fit on the bar end which will lose the black and reveal the aluminum metal. In the end I did not like sacrificing my bar end and did just that and jammed that holder onto the bar end. Other than that I love the mirrors they reflect just what I need when I ever need to glance which I hardly do and it makes my bike look more aesthetically pleasing compared to the ugly stock mirrors.

Once I finally figured out how to mount them to my 2024 Kawasaki Z900RS… I was relieved and impressed. Bar and mirrors add so much to the look of a bike. My only concern was were they actually going to be functional? And more importantly were they going to fit? These bar and mirrors came with a lot of fitment options. Three different sized plastic colors. Several different bolt lengths, and sizes. And the instructions are fairly thorough. Anytime you are installing something on your bike. You really need to have patience. The throttle side mirror was the biggest gumption trap. I ended up using the thickest of the colors on both the throttle and the brake side. You are definitely going to need Loctite for the final positioning of both mirrors. And you’re absolutely going to have to exercise patients. Note: ensure the spacer on the throttle side does not interfere with the throttle if you don’t have the right size collar, it will end up, pushing against the throttle which won’t allow the throttle to return to the off position without assistance.

It fitted my Husky 401 as it should. Great quality build and solid packing. The only thing that annoys me - logo on the back of the mirror. Need to get rid of it, so it will look clean.

Känns som kvalitet rakt igenom, stort + för bra emballage dessutom 👍🏻

Mirror moves by wind and no way to adjust it except by removing mirror glass by breaking glue!

Bonne qualité bonne visibilité impeccable sur ma Husqvarna svartpilen ne vibre je recommande

Produto de qualidade. Chegou como descrito. Fácil instalação. Atendeu a espectativa.