5 Inch 32 FT Long Air Ducting, Heavy-Duty Four-Layer Protection Dryer Vent Hose for Heating Cooling Ventilation and Exhaust with 2 Clamps, Black

Awesome! This is insulated so condensation doesn’t build up when venting outside into colder air. Our washer and dryer is upstairs and the vent go up the wall into our attic then over our master bedroom’s bathroom then vents outside. Well our old ductwork wasn’t insulated so during winter months condensation would apparently build up in duct work without our knowledge. Long story short one morning my wife was brushing her teeth and all the sudden the water that held been building up in duct in attic broke through the cheap aluminum vent and the drywall on ceiling then water came down into her sink. Lucky me not on her head but close! We had no idea condensation was building up in the dryer vent. We get it cleaned out professionally too every six month as we do tons of laundry with 5 kids! So the condensation had been building up fast! We live in a newer home over with over 4000 square feet but we never go into attic so would have never known old duct work was tearing from weight of water. Maybe it ripped from cleanings overtime Idk but point is this insulation duct seems to do the trick as you can just feel the difference in quality. It’s sturdy! Just so much better than the old tin duct work that always tears and rips when you try to install it with the metal clamp and the little screw. This insulated duct stays in tact and goes slides right on doesn’t tear. Still goes on with metal clamp and screw but because it’s a strong plastic or pvc covering whatever it is it goes on smoothly! By the way State Farm didn’t cover the $4,000 plus damage to roof and repairs to duct work as they said this was a maintenance issue! And yes we presented them with years worth of receipts showing ducts cleaning every 6 months still denied it so I paid out of pocket. Now only $4,000 grand some may say but for someone who never had a claim in over 15 years on house or multiple cars you’d think State Farm would of tossed me a bone here but nope. I know what’s all this have to do with simple review of a 20 dollar piece of duct tubbing! If your on the fence of buying the old school cheap tin duct for your dryer vs dishing out few more bucks for the insulation duct get the insulated duct! It will save you thousands of dollars potentially! If you have the condensation problems with dryer venting outside. Excellent duct work just buy this. Was delivered same day when I had to have old one replaced. Well worth it and it easier to clean doesn’t tear when taking on and off etc. Buy it!

Great product — exactly what I needed. The install was super easy and straightforward, and the included clamps were solid and held everything securely in place. The hose itself has good flexibility. Works exactly as it should with no issues. Definitely recommend if you’re looking for a quality dryer vent duct that’s simple to set up and reliable.

I’ve purchased this ducting twice now, and it’s been a great product both times. The quality is excellent — it’s sturdy but still flexible enough to work in tight spaces or custom setups. Installation is straightforward and doesn’t require any special tools. The included clamps make securing it simple and reliable. I’ve used it for multiple applications, including ventilation and exhaust setups, and it has performed consistently well. The four-layer design feels heavy-duty, and it maintains its shape without collapsing or tearing. Overall, it’s a solid, versatile choice for anyone who needs dependable air ducting.

xTool has a 3 inch hose, so if you buy another 3 inch hose, you would expect them to be at least the same size and work with the same couplers. But when you try to use this hose with an xTool coupler, it’s several millimeters smaller in diameter, so it definitely won’t form anything close to a seal. The hose itself is fine and feels pretty durable. It is a thick plastic, but not rigid like the xTool plastic where you can actually turn the hose in a particular direction and it will support itself. I did find that the difference in diameter between the xTool hose and this hose is sufficient enough that you can wind this hose inside of the xTool. So if you can find a coupler that works with this hose and an xTool port, this might be a good solution. UPDATE: I added two more pictures. Because it slides inside the other tube, I cut the xTool tubing to make two ends that go into the coupler and still have enough of the rigid xTool tube to provide some control and structure. I think this will work if you just use this tube to extend your existing tube in the middle. In the pictures you can see that I removed a middle section of the xTool tubing and replaced it with this. For additional structure, you could add more elbows of the xTool tube at strategic locations around this tubing.

Surprised by the quality of this flexible pipe. Used it to hook up a basement bathroom fan. Ran in-between floor joists and under floor joists. Everything is painted black so it fit right in. Thought it would be cheap like the kits you get at home depot but its actually pretty thick and didn't tear easily when cutting to size. Highly recommend.

i got this to go on a 6" inline fan to vent heat outside and it works well, it's somewhat heavy duty material, has some insulation factor to it to prevent the heat from radiating out of the duct and the plastic outside material is black which helps to camouflage it to a degree. it fit perfectly on a 6" fan, the clamps are plenty big enough to allow easy installation, with tons of adjustment, i'd venture to say these clamps would fit an 8" duct all the way down to a 4" duct. the flexibility of the duct makes it go around corners easily and it seems a great value for the money.

Only use this for air you don’t plan to breathe. There is a considerable amount of non-visible fumez off-gassing from the material. Smells like burning plastic even at warm temps, and then gets pretty severe at higher temps (e.g. dryer exhaust or heater output). You will get a headache quickly and maybe get ill in a small room. Also the ends come bare, which makes them hard to fit to existing 3-inch pipe such as for your range hood and can cause leakage and/or poking from the spiral wire structure. If this were for our stove instead of a portable heater and I’d never breathed the output, I’d probably have given four stars for the value.

Easy to use and work with. Very good pipe for the money.

Good product

Si, se lo puse a un extractor de aire y veo que si funciona

Top quality insulated ducting. Cheap and it looks great in black and had a silver insulating interior. 1 day postage was handy as I needed it urgently

Very fast delivery!!! Great product and works well.