EasyFlex 3500-20C-3 Pound-in Landscape Edging, 20 FEET, Black

I wanted to keep the newly created straight edge on a flower bed - 5 metres long - so that the adjacent lawn doesn't spread and gradually merge into the flower bed. The soil is a mix of clay with top soil and not stoney. It was early September and the ground was wet, not sodden. I unrolled the whole 20 feet on the patio for a couple of hours to get the curve out of the Edging Strip and this was helpful. I looked at various different products online and decided that this plastic edging looked good. Neutral dark grey that defines the lawn edge but does not stand out. The various depths of jagged teeth looked practical for pushing into the ground so that any stones could be deflected. And at about 3 inches deep it could be set about level with the lawn so that the lawnmower could pass over the top of it and I would not need edging shears to keep the grass neat. I used a metal lump hammer to bang it in. I don't think the rubber mallet used in the product pictures would be sturdy enough. The Edging Strip stood up well to being hammered without distorting or bending over. Easy to cut with a pair of tin snips (metal-cutting shears) but a small hack saw would do it easily instead. For a 90 degree corner I did not try to bend it the Edging but cut it and did a short stretch. I had about 3 feet left over which I have used to mark a curved edge to another small flower bed.

Looks good I had to wet the ground to help when installing. For the price I would have like a couple of extra spikes. I laid it out flat in the sun to help flatten it

Did what I bought it for, easy to install. I did follow the instructions, by rolling it out in the sun, anchored both ends and left it for about ½ an hour to make it more pliable.

Not staying up keeps loosing up, not as describe

This edging worked very well for us to keep garden bed mulch out of the grass. Some of the points had to be cut off or down when burying over bedrock but it was easy to do.

This edging was very easy to me to install with no assistance. It feels thick and durable. It’s also flexible so it can be bent into a variety of shapes to make the edging look more unique. I installed mine in a wavy pattern and love how it turned out. I’m confident it will last a long time. Tip: it helps to have something like a rubber mallet to hammer in the nails but they can also be pushed in with a hand or a shoed foot.

Me gusto se ve buen material no se ha deformada con el calor bastante fácil de colocar

I’ve installed about 150’ of this edging around our yard. I use an edging tool to create a trough to install the edging in. This not only makes installation a little easier but also holds it in place well while you are hammering it into the ground. The material flexes a little but overall it’s fairly rigid and looks nice. I used a hose to create the layout I wanted with nice curves. Then installed the edging along the hose with a rubber mallet. You’ll need a lot more stakes than the 2 that come in the box. So buy the bag of extras. I used about 3/4 of a bag per box of edging. Works pretty well. I’ll be buying more of this.

Perfect for what we needed, easy to install — would be 5 stars if they included more spikes in the kit, since you really need more than 2 to secure and keep in place