Antec NX400 NX Series, Mid-Tower ATX Gaming Case, Tempered Glass Side Panel, LED Strip Front Panel, 360 mm Radiator Support, 1 x 120 mm ARGB Fan Included

Fantastic case for the price with plenty of room for massive CPU air coolers. PSU basement is a huge plus for cable management. This case is made tinted tempered glaas which looks fantastic as i was going for the showy unicorn vomit build. I also like that the front panel IO allows you to change RGB patterns as well so I'm not stuck with rainbows all the time. Tons of ssd mounts and 1 drive bay for a HDD. Has plenty of room for decent cable management on rear side of case. Ok now for the included case fan rant because this fan sounds like a jet engine and I had to run it molex so basically its running full speed all the time. I will likely replace it in the future however for now i can deal with it. If you're going for a silent build you will definitely want to replace that rear stock exhaust fan.

This is a pretty good ATX case for a gamer PC. I like the partition for the power supply, which is right under where the motherboard goes. Even better if you have a modular power supply (HIGHLY recommended), as there are openings where you can feed the wires and connectors neatly into the motherboard area. It has setups for multiple ventilation options on the top and rear, but not so much on the front, which I think if fine as you really want the hot air to go out the top of the case. The interior is roomy enough for even the largest GPUs, with space to spare. The case lights are also a nice touch. A great choice for any PC builder connoisseur!

Love the features of this case, and I bought 2 others at the same time. This one was by far my favorite for: 1. Looking cool 2. Great cable management 3. Real glass case side instead of plastic Unfortunately it arrived with part of the case cracked. I was able to push it back mostly into place from the inside but there is a chunk missing. I still think this was a better value than the other 2 cases, hopefully this was just a fluke.

Assembled the custom build and right out of the box everything worked as advertised. The 360mm radiator installed in the front by removing the extra 3.5" hard drive tray. This may be a deal breaker for some, but no issues here. I use the smaller SSD trays for storage. One in the front and one in the rear of the case. MY operating system is installed on a PCI-E M.2 drive so this case worked just fine for my needs. Some folks may need more room for hard drives, but I find 2.5 TBs of total hard drive space is enough for a mid level build. On to Antec's support. I did have an LED failure after a few days. The LEDs would not turn on after first locking in an all white state. 1st the lights would go all white and stay there. I would power down the system and next restart the computer then the LEDs quit working. If the computer was turned off overnight and turned on the next day the lights would work like normal again for a while and randomly quit working again with no warning. I contacted Antec Support rather than disassemble the complete computer. The support folks were great. They of course had me try a few troubleshooting steps which I had done several times already, but I did it to satisfy warranty requirements none the less. I also sent a video to show the LED problem 1st hand to the support people. The next business day Antec Support sent a new LED controller and all new LED lights out to replace any possible faulty parts. I replaced the LED/PC control board and now all is well and the system works as advertised. I could have knocked off a few stars for the problems, but with support that good ....(NO WAY)! They deserve a 5 star review for their excellent response times and no extra cost to me. Thanks Antec! I'll be back!

Used this for my first PC build, was very impressed with the build quality! Very sturdy, well built, and really easy to take apart/put together. RGB looks sharp, glass is slightly tilted which makes the inside look really nice when viewing from outside, and cable management is excellent. Overall a fantastic case!

This case will NOT fix X570 motherboard + RGB memory with most 240mm top mounted liquid cooling setups. I had less than 1mm of clearance between 'compact fan' and memory. By default, this case does not have enough airflow to keep things cool (as is 'not getting thermal throttled'). I was able to make it 'work' by removing front cover and adding 3x of Antec 120mm Case Fans. That being said, this would be a PERFECT case for builds that do not require major airflow.

Really great mid size tower! I had bought an equivalent more expensive unit recently at a local computer supply store. I was hesitant to purchase this tower without seeing it in person. Not a let down! I actually really like this tower. Just make sure to add fans for better air flow, however the layout and location of all accessory points was more than sufficient. Looks great, sturdy, and quiet enough to not puck up on microphone next to the tower. Great purchase!

I was quite scared of working with a commercial tower like this one because I though standards might be slightly different and I was overwhelmed, however, when I started building my PC with this tower I found it to be easy to work with, there is ton of space where you can move stuff around, it also have an excellent cable management, I attached some pictures but please note that those extra does not come with the tower, I bought them from another seller but they fit well. Thank you very much for this product, I really like it. Let me know if you have any question. This is the link for the fans I purchased along with this tower, it might be useful https://www.amazon.com/gp/product/B07VSQ27NQ/ Thank you Allen Reed

ال RGB في المروحة الخلفية والشريط الأمامي ما اشتغلو. كان فيه خصم وشريته ب 140 ريال يستاهل نجوم كاملة بما انه رخيص

Ich habe das Antec NX400 für den PC meiner Freundin gekauft da sie sich beim durchsuchen von Gehäusen in die Farben verliebt hat. Das ist auch schon der erste große Pluspunkt: Die Farben von Lüfter und Front LED Leiste sind synchron und lassen sich sowohl wunderbar in einzelnen Farben einstellen als auch Farbwechsel/Regenbogen/Meteor/Pulsierend, ich habe bestimmt noch welche vergessen. Einstellen lässt sich das Licht ganz einfach über einen Knopf oben am Gehäuse. Da wir die restliche Beleuchtung auf drauf angepasst haben leuchtet das Gehäuse nun schön. Der Platz im Gehäuse ist vollkommen ausreichend selbst für Kabelmanagement. Verbaut wurde ein ATX Board und eine GeForce RTX 2070 Super, welche ohne Probleme reinpasste. Die Kabelführungen haben genug Öffnungen und man kann alle Kabel super verstecken und hat eine sehr gute Sicht direkt auf das Board durch die Glaswand. Die Glaswand ist etwas abgedunkelt und dadurch sieht man hauptsächlich die Beleuchtung im PC. Airflow funktioniert sehr gut, da wir noch 2 weitere Lüfter vorne und oben verbaut haben. Temperatur von Grafikkarte und CPU bleiben trotz Burn-In Test in einem sehr angenehmen Bereich. Meiner Meinung nach ein Top-Gehäuse, meine Freundin ist auch super zufrieden.

This is great case, and it looks so good and nice airflow and dust filter. A bang for your buck

Very cool looking.