Glarks Up to 2.2mm Wire Rope Crimping Tool with 150Pcs 3 Size Aluminum Double Barrel Ferrule Crimping Loop Sleeve Kit

As an electrician I often need to reseal the service head cut out fuse, I've tried various options over the years but these are by far the best.

Does what it needs to do. Reasonable quality at this price point. Would not want to use on a big multiple crimping job tbough as a bit fiddly. Fine for occasional use.

It is what it is and it works well arrived quickly

Works well in conjunction with steel cable for picture or mirror hanging

This does the job for not a lot of money and comes with plenty of crimping loop bits. I'm happy.

Perfect for the job!

I assumed this was a complete kit however it is not. Tool and crimps are ok

Used this kit for fitting a straining wire on my loft ladder. Worked perfectly

Very Good quality

This tool is for joining cables. It has been used several times now and does the job perfect. Very pleased with it. I would recommend it to anyone. Very helpful tool. Didn’t take long to get it.

Good product

I purchased two of these, one for myself and one for someone else, for crimping 1mm stranded wire for hanging small to medium weight art pieces. I find that it works quite well. Given the price, one cannot expect an industrial grade crimper, but for limited use with small wires and aluminum ferrules, it is perfect. Keep in mind, this is only designed for ferrules up to 2.2mm. I use a 1.2mm double barrel aluminum ferrule for 1mm stranded wire. For safety, I always use two ferrules. I also found that the cutter portion of the tool cuts 1mm steel stranded wire easily and cleanly. I did not try the tool with steel ferrules, which take more force to crimp. This tool would probably be okay for the smallest steel ferrules, but might not work well for larger ones. So, in general, I would recommend that users stay with aluminum with this tool. I would recommend that before use, the tool's moving parts should be lubricated with light oil. You also have to learn how to use the locking button properly. The crimper does not come with instructions, but the drawings with the listing are clear (see attached photo). You have to press the crimper jaws firmly together to release the locking button, which slides down away from the jaws. Locking is done in the reverse order. One thing you have to be aware of when crimping is if the jaws are pointing downwards when you crimp, the locking button may slide from gravity into the locked position and then it can be hard to unlock after doing the crimp. (If this happens, press the jaws very tightly on the crimp.) To avoid this, you need to either not have the jaws pointing downwards or use a piece of tape to keep the button in the unlocked position while working. If you get really irritated, you could cut the locking button barrel and just remove it from the tool. It is really only used to make storage more convenient and protect the crimping jaws when not in use.

Works great and REALLY WELL MADE and all extras are fantastic