3M Auto High Strength Red Lens Repair Film, 03341, 3.75 in x 7.75 in

So far so good. It’s a great fit for our cracked tail light and it’s much better than the thin red repair tape that is out there. This is a very conforming thin plastic that provides good coverage for repairs. I used the one strip for two of our tail lights this time around. I did pre-clean the taillight with alcohol for better adhesion. I did not cut to the shape of the damage - just kept it square / rectangle shape for the repair. Easier to measure and cut, plus it gives a more clean look on the tail lights. You can barely see the repair patch unless you’re really close to vehicle.

I broke my backup light because I was distracted... I removed the loose plastic and cleaned the surface with isopropyl alcohol for good adhesion. Cut a piece of the 3M lens repair tape and then applied it making sure to get all the edges down by rubbing them down well without cracking more plastic; I will replace the lens in the future. Durable? Time, rain, heat, sun, and cold will tell, if I become complacent and don't replace the whole taillight lens. Waterproof, it's plastic tape with good 3M adhesive, and from my experience with 3M, it should work well in the rain. For ease of cutting, I quickly cut with a pair of old scissors. Value for the money, that is a yes. Much cheaper than a ticket.

Turns kinda dark red, hangs on well.

I’ve been looking for a tape like this for quite a while and it absolutely is exactly what I sought. It’s the right width, flexible, and transparent.

I repaired a broken brakelight lens with this stuff. Here are my impressions: -- WHAT SIDE IS THE FILM ON: Its difficult to determine what side the removable film is on. They should put labels on it so it's easy to see. -- DONT CUT TO SHAPE OF BREAK!: The instructions state to cut out the film in the shape of the break with a 1/2" overlap. This is a mistake. It's better to leave the film rectangular as it will then better blend with the other lines of the brake light. -- NO CLEANER PROVIDED: The instructions specify a 3M pre-treat on the lens, but nothing is provided in the kit. Not even a tiny little dropper, which is all that is needed. -- TRACE ON WRONG SIDE: The instruction states to trace the broken section on the 3M material. If you happen to trace it on the film size, since it's impossible to tell, you will trace it backward,s and it won't cover the break properly -- COLOR MATCHES: The material color is a good match for the brakelight lens. -- USE ALCOHOL TO CLEAN: Since the kit is not provided with the specified fancy 3M cleaner, I used alcohol to clean the lens before applying the 3M material. That seemed to work fine. -- ADHERES WELL: The 3M film adheres well to the brake light lens. Time will tell if it prevents wanter infiltrating. -- AGRRESSIVE TACK: The adhesive is very aggressive, but with a small area of an edge attached, I was able to pull it off to reposition, and the area that contacted seemed to still adhere when I reapplied it. CONCLUSION: Good Adhesion and Color, No Cleaner Provided, Its a Mistake to Cut to the Shape of Break

Works great. Did a temporary fix until I can order a replacement for the tail light on my Santa y.

It looks like the taillight and it really works!

Adhesive is very good. I applied the tape to my right rear tail light last October and it's still in place after a South Dakota winter. The red color faded to clear, so I had to re-apply this spring. Considering the vehicle is parked outside, that's probably to be expected.

I like this product because the color was very good the light transparency was good and the adhesion was outstanding

great tape works well for my car light

Buen producto, buen reflejo y mejor el pegamento de la cinta

It’s really a great product. Totally worth it. One should have this for fixation of lights.

If you’re as sick of Chinese knock off tape as I am, buy this. 3M know what they’re doing - it’s worth the little extra it costs Successfully repaired a leaking carpet cleaner, and am about to tackle a Dyson vacuum with failed seam welds