Velo Wall Rack Bike Hangar Mount Storage, Adjustable Arms | Great for garage, apartment or shed storage; soft rubber contact points protect frames and supports bikes up to 70 lb

Easy to install and great bicycle rack. Sturdy and space efficient.

These are easy to install and work great. I liked the first one I bought so much I bought a second one for my other bike. They do what you expect and doo it well!

Did a bit of homework on this & I couldn't have picked a more perfect bike rack for my needs. First of all the steel/aluminum is much more thick than I anticipated and speaks to its rigidity and strength. The wallplate must be a half an inch thick and the arms themselves are thick and rigid with soft yet sturdy rubber claw-shaped end caps that actually sheath the last couple of inches of the arms. (I thought the ends would just be a snap on piece, compromising the weight that it would eventually hold.) Once on the wall, it simply becomes part of the structure. The arms only extend about 12-13" from the wall plate so depending on your stem to bar-end length, you might have to turn the wheel a bit once mounted. Also depending on the angle of your top tube, or wherever you may place the bike on the arms, the fact that they are vertically adjustable allows you to place your bike level, if that even appeals to any ocd peeps out there (I struggle with it a bit, but as long as I shut every door four times in a row then everything will be OK) ;p. One thing I will say, and this is not a short coming with the rack but rather my bike. You will notice in the pictures that although my 54 crossbike fits perfectly, my mtb had to be placed upside down because my cable routing is attached to the underside of the top tube. Rather than pinching the cables, I opted to place it upside down. Works fine as long as my wife doesn't mind the front tire touching the wall. But it's a garage, so yeah, marks happen. Excellent product & purchase. Will purchase again enthusiastically when I fill out my stable more.

Clean design - sort of a bit of industrial chic or something. Nice enough for inside the house if you display your prized Colnago or Pinarello in the living room. Solid construction and well made. All components have a nice durable finish on them. Soft ends on the hangers to protect the finish on your frame. No difficulty in hanging the bike or taking it off again. Easy to install as long as you are certain that you are going into a wooden wall stud. For anything else you'll need some additional hardware. Do not mount to drywall (sheet rock) with plastic plug anchors unless you want to come home to find your bike on the floor still attached to a big chunk of your wall. Easy to adjust the height of the arms independently for sloping top tubes. Extends far enough from the wall for any bicycle with "normal" road bars - I have no experience with anything else. No facility for hanging accessories which I didn't care about but some people may. I hang my helmet from the handlebars and throw my gloves inside it.

Nice, but a bit flimsy when you extend the arms, which you will have to do to some extent unless you are using some seriously narrow bars. It's a solid mount otherwise, and will require a stud mount - FS doesn't even include those drywall plus, this thing has some heft to it. Replacing the FS "stick" mount which I originally had, which I will repurpose as a wheel mount I think...

This rack has the correct design and strength to hold my 29 Lb. Trek 7100 and stand up to the shock load of the bike getting regularly loaded onto it. It has good resistance to vertical torque - assuring that it STAYS on the wall (it MUST be attached to a stud, no hollow wall anchors). Mine holds the bike just above my parked car so it must not tear from the wall, or drop its contents. The design plusses for this rack are: 1) a long vertical surface mount bracket to resist torque, 2) the web-truss like construction of the holding arms to provide lots of strength - the steel is 7 or 8 gauge - very stout, 3) arms adjust independently to allow the bike to store perfectly horizontally, 4) hard rubber end hangers that treat your bike's paint gently, 5) very easily loaded and off-loaded, 6) simple, sturdy design & easy installation. The box says that it will hold 70 Lb. which will seem UNDERstated when you hold the rack in your hands; all this and a 3-year warranty.

Excellent product for storing my bike! I don't have a kickstand on my bike so I needed an alternative way to store my bike in the garage. I mostly like the functional feature of having variable heights on the arm bars allowing for a more leveled position for bikes that don't have an even top bar of the frame (ie my hybrid/fitness bike or female bikes). Another reason I chose this method of storing my bike is because I read that 'hanging' your bike by the wheel could potentialyl damage the rims due to the unnatural weight distribution on that one wheel (especially on carbon bikes such as my Specialized 2015 Sirrus Elite Carbon Disc in the picture). I knew I wanted to hang my bike by it's frame but I also wanted it to be even and this wall rack achieves that. This rack is super sturdy and I have no doubt in my mind it'll hold heavier bikes such as some mountain bikes. Just make sure you have a drill bit long enough to accommodate the long screws. I'm ordering another one right now for my roommates bike as well.

Buen artefacto, lástima que no es abatible pero cumple su función, los brazos se ajustan para poner la bici recta, yo de todas formas uso la barra porque así la desmonto y la pongo en el rack del automóvil. El material es fuerte y fue fácil de instalar.

Product arrived liked it was returned and repackaged poorly. Box disintegrated inside amazon packaging. Contents wrapped in cling wrap. Scratches on the unit. No instructions although its relatively simple but the guess work isnt what I paid for. Works fine once installed. Does what it does. Just disappointed.

A very strong rack, well finished, and quite easy to install. My road handlebars are 42cm wide and there is a still a 10cm gap to the wall.

Excellent build quality and very easy to assemble. I mounted to a garage wall made of light weight breezeblocks using Rigifix M6 bolts which anchor the Velo wall bracket solidly, really no danger of falling down. Delighted with the look and functionality of the bike rack.

Ich mag den Halter. Habe schon drei davon in der Garage. Super stabil, einfache Montage. Aber das Beste: Räder lassen sich wirklich toll ausrichten. Breiter Lenker? Kein Problem. Einfach den lenkernäheren Halter weiter rausziehen. Geslopter Rahmen? Ebenfalls kein Problem. Beide Halter einfach in der nötigen unterschiedlichen Höhe positionieren, klappt gut. Räder ALLE waagerecht und so dicht wie möglich an der Wand.