SHNITPWR 5V DC Power Supply Adapter 60A 300W AC to DC Converter Transformer 5 Volt 60 Amp LED Driver 110V / 240V AC Input for WS2812B WS2811 WS2813 SK6812 LED Lighting Project CCTV System

I bought this for a WS2812 LED light project and this power supply worked flawlessly. I purchased a new power cable from Lowe's which had the plug on one end and bare wires on the other and had no problems getting it connected.I used some old bell wire (white/red low voltage wire) to wire the power to the middle of the light strand, connecting it with wire caps.The unit has a fan which automatically activates and deactivates based on the unit's temperate.

Works great, very easy to wire new connections to it.

I used this in order to power to packages of rgb led strips. This thing works perfectly for this. It has enough power is easy to use and is built solid. Absolutely no complaints I would buy again.

I use this to power my LED Christmas lights and it works well. The fan did turn on only after the case got warm/hot and then turned off once it cooled itself.The reason I give 4 starts and use past tense in my previous sentence is that the fan no longer turns off once the case is cold but it stays on and the only solution is to unplug it and plug it back from outlet. Been using it for 2 weeks, ~4 hours every day.The voltage regulator works well, comes set at 5.2V.

Works perfect for a lightup stage I’m rebuilding. Easy to use, easy to mount and with the perforated cover will allow the unit to run cool. Other power supplies I’ve used have a solid top and run a bit hotter.

I use this to power 334 WS2812b LEDs which can draw about 22 amps max. This runs cool, and provides solid power output. Appears well made.

no power chord.added ac 110 chord, no led indicator when plugged in.zero documentation, even though its pretty basic.no reading on ay of the 3 outputs.Dead on arrival perhaps?

I use this to power a Raspberry Pi 4 cluster. The 10% voltage adjustment is very useful as the voltage drops somewhat under load. I cut off the USB A connector from a cable and attached the red wire to +5V and the black to COM.

I have several of these in my house running different LED light strips for things like under-counter lighting, panty lighting and custom Christmas lights

Im Gegensatz zu vorher gekauften Netzteilen kann ich das Netzteil mit rund 180 Watt voll belasten. Die Leistung habe ich auf 180 Watt begrenzt. 200 Watt würden vermutlich auch funktionieren, habe ich aber nicht getestet.1024 LEDs laufen perfekt :)

So far I'm highly impressed with it. I took measurements and happy days.If you look for something to power a few meters of 144/m led stripes this is the one.Please bare in mind, I only had it tested shortly, I can't comment on how long it would last.

product quality is good but no instruction in the package telling how to connect to AC.

Good