50/25mm UD Matte Carbon Wheelset Tubeless 700c

edit: About one year and 7000 miles later, the wheels are toast. The rims are fine but the rear hub has had enough maintenance issues I am putting it aside. I guess I could get someone else to re-lace the back rim with a new hub...not sure its worth it though. I rode this wheelset hard, through snow and ice and it handled it well, but after around 5000 miles the freehub seized. When this happened I was able to take it apart and regrease it and it worked fine... Around 7000 miles I started having huge drivetrain issues, chain drops under load, ghost shifts, etc etc. I checked and replaced other drive train components before eventually figuring out the freehub shell was rattling around its axis. I tried to take it apart again to see if I could repair a second time but the threads are now bonded ? and I cannot take it apart. At this point, I have decided to accept this freehub is at the end of its natural life. . All in all, I really enjoyed the wheels and I went fast on them, probably faster than the stock wheels. However, now as I have returned to the office most of my mileage went from fun/fast fitness rides to daily commuting and I am not sure these wheels have the robustness to stand up to up to my wet environment. I mostly feel I got what I paid for e.g. 350/7000= 5 cents a mile. Review 0: This is only after 30 or so miles. I will update after 500 miles. I got into biking 6 months ago and primarily commute 8 miles each way and do some sportive rides. Longest ride is only 40 miles. I ride 100-200 miles a week. I am extremely pleased with these wheels. I ride an extremely entry level endurance road bike, the Triban rc 120 with an 8 speed microshift groupset. Putting carbon on this bike is kinda like putting lipstick on a pig...or so I thought. A few weeks ago I crashed my front alloy rim and replaced it with a heavy and sluggish cheap replacement. I decided to get these wheels a ) to look gangsta b) feel fast c) go fast d) hopefully maintain speed in some intense headwinds. So far the wheels are delivering on all fronts. I am going reliably 1-2 miles per hour faster and I haven't even ridden clipless yet ( I ride on flats when I commute). The big changes are the wheels feel more responsive, light, and have a big snap in them. By snap I mean when I accelerate, I feel the power going into the road immediately. It is easier to maintain speed and I think my peak speeds will increase. The wheels make a nice whooshing sound also. Basically, the wheels make me want to ride more. They also increased ride comfort, smoothing out some bump, but I also feel way more in control of my bike and can take tighter corners and lines. I am also running a lower psi, I dropped to 80 or so from 100 psi. I am running gp5000s in 28mm. Issues: I had some trouble installing a casette-it was really wobbly and caused shifting issues. (overshifts) I think this was user error. After this I removed the cassette and swapped in my spare 8 speed cassette (11-34). The valve extender took a little finagling but work great. The spare worked fine immediately? Not sure what was wrong with that. In summary, my only regret is not getting these wheels sooner.

I have over 2000 miles on them now and they’re doing great. I had a balance issue early on. They would wobble around 30mph. I bought golf club weights and stuck inside the rim beneath the rim tape. The real solution was to switch from 80mm stem tubes to 60mm. “60mm is just long enough to get my tire pump on” The back wheel was perfect no weights necessary. The front still needed one. I’ve had them up to 40mph, smooth rolling no problems. The breaking surface is in good shape to date. I was paranoid about the breaking surface early on and babied them but now I just ride. I do inspect them along with the tires after long rides. I’ve lost some weight but still a big rider 195 lbs. Excellent value. I like these wheels. Just under 300 miles so far. They’ve been perfect. I’ve just started riding again and I’m coming back heavy 215 lbs. They are fast. No problems with braking. Somewhat hilly where I am so I did trto break them in a little making sure not to heat them up too much the first 50 miles or so. The hubs seem ok I don’t notice any more play or slack than my Ksyriums. The rims came true out of the box. They shipped from China. I received them three weeks from when I ordered. I will update after a couple thousand miles or earlier if need be. I been riding Mavic Ksyrium ES Anniversary Editions and have over 20K miles on them. I replaced bearings with ceramic at about 10K. The wheels are still perfect. So that’s my standard. I payed $1000 for them 14 years ago. These Super Team Wheels are faster at 1/3 the cost.

I’ve got about 500 miles on these and have had zero issues. Went from original aluminum DT Swiss R460’s to these and I’d say the ride is a quite a bit of difference. This is my first set of carbon fiber wheels and i wished I’d done this a long time ago. Carbon has more absorption of the road making it a smoother ride. I definitely feel faster as the Hubs have a long spin. Rim tape was already installed, plus. They do provide extra spokes and the carbon fiber specific brake pads, also a plus. Only downside is the quick release axle skewers were to short for my bike so i just used my old ones. Rear hub is pretty freakin loud as well. Cicada swarm coming down the road! I had been eyeing these wheels for quite sometime and there are many options of the same wheel all over Amazon. Colors/design etc. what i really wanted was the all matte black ones with no design/color. But i ended up getting these specific wheels as other ones on Amazon were not - UCI approved wheels. Since i hadn’t seen these specific wheels over the last year or more researching i figured these would be the latest and greatest and newer manufactured sets. Newer = better/safer/tested etc. it seemed like a fair assumption. Lastly, any new wheelset makes it feel like a new bike and I’ve been happy to spend some more time in the saddle with the Super Team’s. I would recommend this wheelset to anyone and especially to anyone looking to upgrade to carbon without breaking the bank.

Great wheels for the price. Rims have stayed true so far. My free hub was exceptionally loud. When I opened it up, I noticed the blob of red grease placed by the factory did not actually touch the pawls, and that they were basically grinding on eachother unlubricated. Added some new grease and it's been fine.

Perhaps it’s the fact I’ve ridden stiffer metal wheels for so many years, but in steep lean angles the bike feels a little sloppy and unstable, especially if you aren’t smooth with control inputs. The tires were tough to get on, required a lot of soapy water and a few tries to get the beads to seat. (I use classic inner tube/clinchers for the sake of simplicity) I can already see field servicing a flat tire will be tricky and will probably stick to aluminum rims on long distance rides. Braking felt good and responsive in spite of not being broken in yet. Quality looks good, though the permanently affixed “read the manual” placard is kinda cheesy. The bike felt faster on a course I’m well versed in. More testing will be needed before I can determine their durability.

Came in perfectly true, so far no issues whatsoever. Total weight of the two wheels in 25x50 was 1,527 grams. (For reference, my old aluminum set in 19x20 that these replaced were 1,953 grams) The hub is noisy but that seems to be the trend these days. It doesn’t actually bother me but I’m more worried about it annoying others. The hub is an R13, (w/ J-bend style spokes) which is a pretty standard budget hub for these new Chinese companies. At sub $400 for the set I can’t complain, you could spend twice that for little to no gain in any aspect. And you can always swap out the bearings for ceramic later, or replace the spokes with carbon ones and still be cheaper than buying a set that comes with those things. I’d say you can buy these with confidence.

I rebuild bikes as a pandemic hobby, and just purchased my second set of SuperTeam wheels. The first set were installed on my personal road bike, and I've clocked about 130 miles on them so far. Honestly, I think they're just awesome. They're easy to install, appear to be built without any significant manufacturing flaw, and seem to take a beating on the highway and the trail. Now, I realize this sounds ridiculous on its face, but these wheels are fast! I've noticed an increase in speed. In particular, there's a real increase on downhills that have only a slight angle of decline. The increase in speed on these baby hills is disproportionate high, and awesome. I've had no problems with these wheels so far. I'm running them with Continental 5000's at around 103 psi.

*** 1 star for customer service*** Overall I am impressed with the astethetics of the wheels/components. They are light and seem to be well made for the most part. Problems- my front wheel makes a popping noise every rotation. I contacted the seller and after numerous pictures/videos they decided to send a replacement rim. I didn't realize that meant no spokes/hub installed. (BTW still don't have it cause it's coming from china) I don't have the tools to work on rims and the local bike shop wants $120+ to swap the components over and true the wheel again. I wrote the seller back and their response was "the spokes and hub are good, we are only sending the rim to you, and you agreed" I THOUGHT IT WAS AN ENTIRE WHEEL COMING TO ME. I spent $385 and now I gotta drop another 120 to get the wheel fixed? This is BS. After I completely stripped the wheel, I discovered that something is rattling inside of the cavity and I can't seem to remove it. Maybe it's a spoke nipple that was dropped and they just assembled it anyway? Who knows. Local bike shop checked the spoke tension and it's crazy high compared to the recommended 90kfg on the listing. I've learned if I have ANY issues, just return everything...don't attempt to work with the seller and get the short straw like I have. Update- I have located the noise, added a video. The inner carbon structure is broken/cracked so with every rotation it pops. Seller still won't replace for me and I haven't even owned them 30 days yet.