Garden Hose Fie Adapterlter for Pressure Washer inlet Water

Works really well. Used it on a well head hose bib and the sprinklers would clog in less than a minute. This eliminated 99% of the problem. Used on a job site for sewing grass Banks.

We are using these to replace the bulky black plastic irrigation filters that leak after 1 month. However, my son didn't realize I had gotten a pressure regulator (brass, 35-45 psi) to put upstream to protect this filter and after several uses with an irrigation timer shutting (quickly), the side of this filter blew out. Thankfully we were nearby so could shut the water off quickly. Our normal water pressure is pretty high so now we are using these (4 of them) with no issues so far with the brass regulator upstream of this filter. I wish they could supply a finer mesh to preserve my irrigation hoses longer but it is a give and take with DIY irrigation.

This M MINGLE Garden Hose Filter works as expected once properly installed and is a good addition when using a pressure washer or washing a car. Fit: The fit is good, but you do need to take your time aligning the threads correctly. Using Teflon tape is recommended to ensure a proper seal and prevent leaks. Water Flow: Water flow is decent and not overly restricted once installed correctly. It maintains enough pressure for typical washing tasks. Cleaning Performance: It does a good job filtering out sediment and debris before it reaches the pressure washer, which is exactly what I needed for pre-filtering car washes. Included Accessories: The included extra mesh screen is a nice addition and gives some flexibility depending on how fine you want the filtration to be. Appearance: The unit looks simple and functional. Nothing fancy, but it looks well-made and purpose-driven. Durability: So far it seems durable and holds up well under regular water pressure use. Overall, once installed correctly with Teflon tape and careful threading, it works well as a reliable pre-filter for protecting equipment and improving water cleanliness.

It is important to note that this product leaks around the filter casing if the o-ring does not sit properly in the groove. There is a 2 inch ID and 1/8 thickness white silicon o-ring that fits on the transparent filter casing. The o-ring has to sit in the groove behind a 1/16 ledge around the circumference of the groove. The o-ring has to be stretched a little to fit in the groove. Once the o-ring is in the groove put in a little silicone grease on the o-ring and tighten by hand or use with care a small oil filter tightening band. The leaks stops once you do that.

I needed a filter for a natural water source so pine needles etc would stop plugging up a gravity fed sprayer nozzle and I am blown away by the quality of this product. The black plastic feels very robust, the brass threaded parts are flawless and sealed perfectly on my less-than-perfect ~30 year old fittings, the clear filter body and filter design makes maintenance a breeze, and I have had zero issues with my nozzle getting plugged every since installing it! I'm using the larger filter since my system isn't sensitive to fine stuff, but very cool to have gotten two grades of filters and all the extra seals then sent with it. Highly recommended product if you have a similar need, you won't find anything better!

I purchased this filter to be installed before the washing machine to filter the calcium particles in our water system. First time I installed the filter, I did not pay any attention to the built qualities of the filter. When I installed it, it seemed everything were working good without leaks. However, over the night, the filter housing leaked water from the o-ring in the clear filter housing. The other fittings on the filter were leak free. The clear filter housing was hand tightened, but it should not have leaked water. our water pressure is at about 70 PSI. When I disassembled the filter down and investigated the parts, I found lots of burrs (flaw in the mold caused access plastic to squeeze out through the mold joints) at the mold joints on the black plastic housing. These burrs were at the housing rim and the sides of the housing. See attached photos before clean up. The clear filter cup was perfect with no issues, but the black O-ring was damaged by the burrs scrapping the rubber seal surface when the filter housing was assembled. Also, the surface on the rim which was to be sealed against the O-ring was rough, so creating a good seal was questionable. I thought about returning the filter for a better made filter. This led me to research the website and looking at these specific locations on the filters for any issues from the pictures on the websites. After reviewing many different brands and models of the same $10 to $20 price range, I did not see any differences, unless I pay more money for it. So, I decided to correct the problem myself by shaving the burrs off from the joints. I took a utility knife blade and carefully scraped the burrs off. After that, I used extra fine sandpaper to sand down the joints. I also sanded the rim surface with same sandpaper just to get rid of the roughness. See the pictures showing after sanding. Now I have this filter back in service. It has been two days without any leaks. I guess the damage on the o-ring was not serious enough that it sealed the filter housing okay. However, there is another flaw I found as I was assembling the filter back together. The filter screens the filter comes with is shorter than the space the screen fits between upper housing and the clear filter cup. if you do not install it just right, you end up getting a gap at the bottom of the cup such small particles will escape the filter screen. For this reason, I recommend you installing the filter screen in the upper black housing barely fitting over the inner tube first. And then, put the clear cup carefully over the screen until the bottom edge of screen makes a positive contact with the bottom of the cup before screwing the upper housing and the cup together to finish the assembly. Do not over tighten the filter housing and the cup. After all they are plastic. Even though I had to work on this filter to make it leak proof, I think you cannot beat the price. I only recommend this filter and same looking filters on the Amazon market to those who can do this handy work. This is an update: After 2 weeks in installation, the clear filter housing cracked and leaked water. See attached photos. My laundry room is located on 2nd floor, and the water leak caused damages all over the 2nd floor carpets and cork flooring and the first floor ceiling and walls. It caused damages in many thousands of dollars. Lucky when the leak started, I was in the house and was able to act quickly to minimize what could have been a total destruction of the house. This is the case of You get what you pay for. If you are looking for an In-Line filter, please check the pressure rating first. And, stay away from products like this.

great product. Installed on faucet of my garden hose because because the frequent cloughs due to sediment on the water. As it is transparent, you can see when the filter is full and it is easy to clean.

Second one I buy but will be the last. They tend to leak and thread tape is required. Mine at the 3 year mark the plastic failed and it burst.

l'ho comprato come filtro per scarico lavatrice per intaso scarico e va benissimo basta cambiare raccordi

Good filter for my garden hose power wash set up .

Easy to fit, easy to use. Hoping they will do finer mesh filters in the future as I would be interested

井戸水に砂が混じるので使用しました。 フィルターの細かい物で使用していますが、効果抜群です。 値段も手頃なので良い買い物が出来喜んでいます。 ８０番のフィルターは役に立たないので使用していませのでもう少し細かい１２０番位のフィルターにして欲しいかな。

Sieht gut verarbeitet aus und ist im Verhältnis zu den namhaften Herstellern deutlich günstiger.