VLANDLed Headlights Compatible with Lexus IS250/ IS250C IS350 IS350C IS220d 2006-2012, ISF 2008-2014 w/Sequential Indicator w/Projector w/Amber Reflector

Visually one of the best upgrades I've seen to bring the car up a decade! I've been waiting a while to write this to be sure they work, stay dry in heavy rain, and last. So far, a great addition! Some install notes- the fuse box that you need to insert the jumper fuse into is listed as "on the driver's side". I initially thought it was the fuse box inside the car on the driver side and was pulling my hair out trying to figure how to get a wire through the firewall. Good news, it's under the hood just behind the driver side headlight. You will have to cut a small notch in the fuse cover so that it still closes after you install the fuse jumper and lead the wire out of the box. Also, these lights will NEED to be adjusted once installed, but getting to the gear to actually adjust it using a socket or wrench is IMPOSSIBLE! I managed to adjust it using a flathead screw driver and tediously pushing the gear in the direction to raise the beams. It takes forever to get them where they need to be, as they come out of the box facing directly down in front of the car. Be patient and take your time. It's worth it! Once adjusted properly they are way brighter than the factory HIDs. I adjusted them at night against my garage door and then drove it to ensure they were up high enough without blasting oncoming cars.From looking at the previously posted reviews, no one ever posted a picture of the "Gap" between the headlight assembly and the fender. I provided a pic of the gap and the adjuster gear on this review. Hope it helps in your decision to proceed with it and what you'll need to do to install them. Removing the bumper is a must to get to the mounting screws but there is a great video on YouTube that shows all the steps and bolts you'll need to get at to get it off. (Video was for another headlight product but the info was great). Pics also provided with after the install, including changed out amber fog lamp LEDs. I think the trouble people have posted about flickering and dimness may result in trying to replace factory Halogen Bulb assemblies. This review was for a 2010 IS250 with factory HIDs and the AFS system. The instructions provided also show which fuse to remove after installing the headlight to turn off the AFS warning light that will come on once it doesn't see it's original factory assemblies present.Very happy with the look and functionality with these lights!!

I ordered this to replace my 2008 AWD IS250 headlight assembly lamps where the plastics are pretty much yellow and even after using one of those headlight cleaners/clearers. The product came in and had it professionally installed. It came out really good but forewarn that it is not fully fitting. there will be some gaps on some parts and I won't recommend forcing it. Otherwise you may crack the plastic housing. The headlight provided a very unique look unlike any other one out there. I love the LED look and the check mark running lights. The headlight checkmark run on daylight and also two of the LED will also run on daytime running light. But it flickers (a really fast one) due to lower voltage. The flicker itself really doesn't bother me too much and to me i thought its pretty cool when running it during daytime. You can however turn off your daylight via toyota tech stream software that you can run on windows with your laptop. Originally I would have given it a 4 stars until I had contacted their support. The issue for me was that the passenger side of the headlight...i noticed that there was a white plastic inside the headlight unit where the otherside didn't have it. It was definitely a manufacturing defect. At first I was thinking to let it be but I keep seeing it and also preventing me from adjusting the headlight up/down. So i had contacted the Vland support to help out. Their support was topnotch and I sent them the picture of the issue. Nini the person that helped me out took care of me. Had formed up a replacement for that side of the headlight and came all out of his/her way to replace it for me where the shipping was coming from China. It took almost a month to get the replacement but it was so worth it. Once I got it, I replaced it and voila!!! I can now adjust the light height! All in all, thanks to Vland support and Nini for getting all these sorted out. That's when I gave it a 5 stars. I get a lot of compliments on my Lexus and how unique the headlight is.

Truly plug and play. Direct replacements, just swap over the lower bracket from your original lights (3 screws). Very high quality. Gives your car the LED triple beam look of the newer factory upgraded Lexus headlights. My ONLY complaint is that the fitment isn't 100% OEM perfect. There is a slight gap in the upper corners of the headlights where they meet the fenders, I'd say about an 1/8 of an inch, but it is noticeable if you look closely. For the price, ABSOLUTELY 10000% buy these. I don't see how these can get a negative review from anyone... Buy some LED fog light bulbs from Amazon and they'll match the headlights perfectly!

Not happy at all with these lights. Flicker really bad when off. They have a Z shadow when lights are on. Pain in the A** to adjust height . Definitely not worth the extra hundred dollars for the animation. You’re paying an extra hundred dollars for the light to turn blue at the end that’s it. It does not breathe, like it says in the description. Not very happy at all he lights. Got the one with the DRL on the bottom and animation.. contacted Vland a few times with zero response. Not a happy customer!!

The media could not be loaded. They are a great upgrade. This was a 2010 Lexus is250. The bumper needs to come off in order to replace the headlights which is a little tedious and involves a lot of clips and screws but is not overly hard.The daylight running lights are not powered in this model. There is a wire to split off the ignition fuse but we opted not to use it as it’s a 10a fuse and the wire adds 2 15a in its place.The turn signal action is pretty neat too. (Video)Don’t forget to adjust the headlights before assembling everything back together! XD

After they were installed, I had to go back and do some adjustments because the driver’s side was positioned the way I wanted, but the passenger’s side was positioned lower. I had to turn it a couple of turns to position it the same as the driver's side. They really make the car stand out.