ALLDREI 100 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering Compatible with Arduino Kits
Description
- PCB Board: 30 pieces double sided PCB prototype boards in 4 sizes, Double sided board with plated-thru holes allows components to be easily soldered to either side of the board 3 Types of Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 0.1'/2.54mm, single row and straight connector 2 Types of Terminal Blocks: 5 pieces 2.54-308-2P and 5 pieces 2.54-308-3P; Pitch: 0.1'/2.54mm Jumper caps: 30 pieces standard 2.54mm pin spacing circuit board jumper cap 100 % SATISFACTION GUARANTED: General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Extra accessories to make life easy for you (Screw Terminal Block and Headers)
Components Features:PCB Board features and info:- 10 pcs 2 x 8 cm (168 solder points) with a matrix of 6 by 28 Plated Through Hole (PTH)- 10 pcs 3 x 7 cm (240 solder points) with a matrix of 10 by 24 PTH- 5 pcs 4 x 6 cm (280 solder points) matrix of 14 by 20 PTH- 5 pcs 5 x 7 cm (432 solder points) matrix of 18 by 24 PTH★ ★ Header Sockets- 10 pcs 1 x 40 Pin Male Header Pin- 10 pcs 1 x 40 Pin Female Header Pin- 10 pcs 1 x 40 Pin Right Angle Male Header PinPitch 0.1'/2.54mm; pin length 11.5mm / 0.45';★ ★ Jumper Caps- 30 pcs Jumper caps ★ ★ Terminal Blocks- 5 pcs 2 Pole Terminal, (2.54-2P)- 5 pcs 3 Pole Terminal, (2.54-3P) ★ Electrical SpecificationRated Voltage: 150V/AC; Rated current: 6A; Contact Resistance: 20m Ohm MAX; Insulation; Resistance: 5000M Ohm/1000V; Dielectric Strength: 1250V/1 min★ Mechanical SpecificationTemp range: -40F ~ +105C; Torque: 0.1 Nm; Wire range: 26~18AWG; MAX Soldering: +250C for 5 Sec; Strip length: 4.5mm; Pitch 0.1'/2.54mm Terminal blocks; Poles: 2P, 3P★ Part and MaterialScrew: M1.5 Steel Zinc plated; Wire guard: Brass, Ni plated; Pin header: Brass, Tin plated; Housing: PA66, UL94V-0
Reviews
Z**R
Fine kit for the price, but some parts are difficult to solder
This is a fine kit for the price with a nice set of perfboards. However unfortunately I found that it is nigh impossible to get solder adhering properly to the female headers (the male headers were a breeze, no problem soldering them proper), so it may be a good idea to grab some of those from another source along with it. It is still good value as the perfboards themselves serve their purpose fine, accepting solder with ease.
M**N
All the essentials for a reasonable price
Lovely PCB - bear in mind it's double-sided. Ideal if you're not looking for a specific size, but just something for prototyping. Header pins seem decent also.
M**N
Good set of parts
Brilliant set of pieces! PCBs were easy to solder to and there’s a great variety of sizes.
P**N
A nice quality little kit.
A nice quality little kit at a very good price, very pleased.
J**A
Great kit for the price
really great kit for the price, a lot of PCBs and pins
W**I
ok
ok
K**R
Very good
Really nice set of boards and headers.
P**R
Great product
Great product
Common Questions
Trustpilot
1 month ago
2 weeks ago
