VIVO Aluminum Articulating Dual Monitor Arm for 13 to 30 inch Screens, Desk Mount Tension Spring Monitor Stand for 2 Screens, Black, STAND-V102O

I work from home, and was needing more space on my desk due to using multiple screens. After looking up many different screen holders, I found this one. I loved that it was super functional and also had the option of a stylish and neutral white color. Absolutely love it. Heavy, easy to install, and easy to use. It is super sturdy so I have complete peace of mind and am not worried for my screens. Makes life much easy with long hours sitting at my desk. 10/10 recommend and would buy again!

Very good quality on this item EZ installation for all parts . Note, The tools that are provided are Allen keys they work well for basic assembly, these monitors are 32” On the default setting the springs didn’t hold up a chance and they were dropping down to the desk every time , I used the Allen keys they provided but the dials for the - & + resistance felt really tight with the small Allen key provided and was hard to turn into a tighter resistance. I proceeded to just go ahead and use another set of Allen key set with a handle that I had in my tool box, it provided me with a much better grip to spin the resistance dials , I had to spin the tool about 15-20 times to get it into my best resistance position one you spin the dial enough you can test for the desired resistance of the spring and position of monitors. Overall I’m very happy with this product, I purchased more after this buy for my additional work stations. Good luck.

This is my first monitor arm, and it works fine. It barely wobbles, and it feels sturdy. Supports my 9.1 lb (4.1kg) monitor, but the arm loses tension and falls at about 7.5 in (19cm) above my desk. The monitor can tilt forward up until about 45°. The range of motion is basically halved. At its lowest point, my monitor doesn't touch the desk, and it stays right in place. Easy to set up, even just by myself. I took the advice of some of the reviewers about being careful of the spring, and nothing went wrong. It's easy to assemble using the clamp, although I cut up and glued some foam pieces onto the areas touching my desk. All in all, good purchase at an affordable price.

I had a problem with the position of the VESA panel, I contacted support and they immediately helped me and explained that it can be rotated, it just takes more force.

If you haven't Vesa mounted a monitor before you may not know how much better life is with these handy tools. My work has been from home for a while and having a functional desk, clean and organized has always been a passion. Unfortunately I had 3 monitors in the house that didn't have Vesa compatibility so it was never something I thought about seriously. Furthermore for some reason my impression was that they were expensive and hard to install. My set up was just a 27 inch monitor from my company (some 9 year old heavy garbage VA) and my laptop. When my son started getting into gaming I bought myself a 25 inch 144hz monitor to tie into my set up so we could play together. Things started to get messy on the desk 3 different sized monitors and bases etc. The company monitor and the new one had Vesa mounting though. So when I started to look at prices for these things I was shocked at how cost effective they are as well as easy to install. Well after about 10 minutes of setting it up and making the adjustments for the weight of the monitors, it just worked perfectly. I can't believe how nice and easy the things work. In fact I liked it so much that I installed one on my son's desk and bought special adapters to add Vesa capabilities to his set up (HP IPS monitors almost all of them don't offer Vesa at least the ones I have from best buy) When I see a monitor on a desk now, all I want to do is Vesa mount it. If you are even remotely on the fence about these, pull the trigger and get them. They are easy to use, cheap to buy and look fantastic!!!

I bought two of these to stabilize my bottom row monitors and reveal more desktop. I have 4@ 24" VESA/HDMI monitors with SOC "thin" VESA mounted computers (Intel 8350, N3050, and Raspberry Pi-4b) running virt-viewer to support my virtual desktop server (running CentOS-8.1 KVM) an IBM/Red-Hat/CentOS hypervisor product. Caution: My 12 lb monitors keep tilting downward a week after I tighten the bolts, even though the arms are rated 14 lb The monitors are different models by different manufactures and I want the tops of the screens to line up. The assemblage is definitely safer. I knocked one of the monitors over during the deployment and rendered that monitor unusable. My deployment difficulties were due solely to the venue - a corner desk with a window near the middle. The desk is up against both walls. And, I also have a Picaso hanging next to the window, which was partially blocked by the monitor that fell over. The monitor cables exit a conduit exactly half way between the two pairs of articulated arms. So, I have a cable management problem that will be solved ... eventually. These monitors are now 9" closer than the top row and 2" higher than the previous deployment exposing more useful desktop. The monitors are arranged in a quarter circle, or rather will be after the replacement arrives. The dual Vivo dual pneumatic articulated arms are extremely well built and definitely heavy duty.

Good monitor arms. Two 34" Monitors fit well. Seperate mounts would need separate measurements, while this is perfect after mounting dead center on the desk.

Great quality product. So easy to assemble and does an exceptional job

Ik gebruik dit product nu al een paar maanden. Ik heb 2 monitoren hier aan hangen (één van 27 inch en één van 24 inch). De armen kan je op 3 punten draaien, de arm omhoog en omlaag doen en de monitor kantelen en draaien wat heel fijn is. Je kan de bouten aandraaien om de armen losser of strakker te zetten, de monitor zakt daarna ook niet meer en de arm staat dan steviger vast. De poot van de arm is ook stevig en beweegt niet. De kabels van de monitor en toebehoren kan je niet het allermooiste afwerken helaas.

J'appréhendais un peu d'acheter ce genre d'accessoire sur un site non dédié à l'informatique, et au final j'ai été agréablement surprise ! En plus d'être esthétiquement très joli (d'autant plus pour une personne attentive au détail), l'acier est vraiment très solide (en d'autre terme, ça ne fait pas du tout cheap). La base est simple à monter, en revanche la pression des bras est plutôt compliquée a régler. C'est pour cela que je mets 4 étoiles. Mon écran le plus lourd, si je le mettais en position basse, n'était pas retenu et tombait tout seul sur le bureau. Également il avait tendance à pencher en avant. Il a fallu que l'on cherche quelle vis causait ce problème afin qu'on la serre avec force. ✅ Une fois le problème résolu, les écrans se déplacent et se positionne à notre guise sans problème et tiennent bien en place. Je n'ai rien d'autre à dire sur ce produit, il a un prix accessible et correspond à toutes mes attentes. 💯 Si vous n'avez pas un budget exorbitant à mettre dans un bras je vous conseille vraiment celui-ci, soyez seulement prêt à passer un peu de temps sur l'ajustement des serrages.

سهل التركيب والتعديل ومنصوع بشكل احترافي وبجودة عالية جداً، أنصح به دون تردد.

Zwei Monitore angebracht einer hochkant einer im Querformat, Montage am Schreibtisch pipifax dank der Anleitung ganz easy und qualitativ