Parts Kit DG261 Replacement for Brinkmann 810-1575-W Gas Grill - Stainless Steel Burner, Carry-Over Tubes, and Heat Plate

Fit perfectly!-Brinkmann 810-1575-0- Look to be as well made as the originals (which were pretty beat up but have been on the grill for about 7 years). All the screws came with it - which was a nice surprise....took about an hour to change the burners out- mostly because I had to drill out the old screws and there isn't a lot of space to get your fingers in there to get the nuts on the bottom of the screws. We also scraped and cleaned the bottom of the grill while everything was out so it probably was only 30 minutes of time for the burners themselves. Great price! Grill is like brand new!

Burners fit with minor adjustment. They are 1/2" shorter that the original burners, but I knew that before I purchased them. Just had to make my own rear mounting brackets to make up the difference. The major difficulty was adjusting the air shutter to get the proper flame. Some were adjusted correctly and some were open too far. I found that adjusting the shutter to about 1/4 inch open worked the best. Flame is deep blue and about 3/4" long.

I've been going back and forth between getting a new grill and refurbishing my ~2 year-old Brinkmann 810-4580-S. After failing to find a kit specifically for that model, I decided to go with this one. The crossover tubes and heat tents were consistent with dimensions I thought would work. Worst case would be that those two parts would fit and the burners wouldn't (I had not disassembled the grill to get the dimensions exact for those), but considering the package price, I was willing to risk it. The good news is all three of the components fit! The bad news (and thus the 1-star deduct) was that it took some modification to the parts and the grill itself to get everything installed satisfactorily. The heat tents fit perfectly, so all good there. However, the burners and crossover tubes took some modification to get them just right. The burners: While the length of the burner was fine, the original burners (and their mounting location in the grill) have a bolt-hole that is slightly offset to the left. The replacement tubes' bolt-hole is offset to the right. The fix is not as easy as "then just turn the burner over" because the burners' top-side has gas outlets that would be facing downward while grilling if you turn them over, and I did not like that idea. I got around this by drilling new ~1/4" holes in the grill's mounting location to match the replacement burners' offset. If you do this, be careful to support the bottom of the mount as you are drilling. If your grill is like mine, these will be a bit rusty and you could pretty easily snap one off. The cross-over tubes: Regrettably, I found that the bolt-holes in these did not line up particularly well with the newly-drilled ones (and though I did not test this, I don't think they lined up real well with the originals either). I got around this pretty easily by using tin snips to "slot" the mounting holes out to each end of the bracket. This cost me a trip to the local home improvement store, and about another $15 for a set of their snips, but more tools in the tool bag at the end of the day is not a completely bad thing. This kit's only other notable drawback is that one of the grill's burners is distinctive because it has the ignition attached. This kit has five "standard" burners, so I ended up leaving the original ignition burner in the grill. Additionally, you'll want to get new bolts to replace the ones you'll likely drill out in order to get everything apart in the first place. It just so happens the size you'll need is available in a bagged 5-pack at the local home improvement store (1/4" x 20 x 5/8", I think). If the manufacturer were to slot the crossover mounting holes, drill two offset holes in the end of each burner, include one with an ignition, and include replacement nuts & bolts, this would be a perfect kit. As is, it still beats buying a new grill, and the work required to make the kit work is not too bad.

Parts appear to be good quality stainless of decent gauge. Hardware is not stainless and would not be expected to last, so I used stainless hardware I had on hand. I don't know if our grill is an exact match, but the flame guards had to be cut shorter. Output seems lower, but I haven't attempted to adjust; the old burners were way past needing replacement, therefore I can't say that the original burners put out more BTUs

Ordered this because Brinkmann had sent me replacement warranty burners under number 812-7140-0. The add listed this number as a fit for that. (The grill is a 810-2411S). I could force them (bend ends) to fit but had to drill new holes. Grill is old/rusted, so would have needed to do that anyway because could not simply unscrew old burners at this point. The back pieces could be made to fit so the grill lights well now, but the cover plates do not fit unless I cut them. If you have an 810-2411S, should probably get a different set even if you have used 810-2411S replacement burners before.

Install was much easier than I expected. My grill was slightly corroded on the supports that hold the connector tubes, so the included screws were a little more loose than I like (no fault of the product or supplier). I bought 5 larger diameter screws at the hardware, and the grill is like new. I did a scrubbing of the grill body with Bar Keepers friend, my go to for stainless steel, and pumiced and oiled the grilling surface, and my neighbor actually thought I had bought the same grill again that I had had for 4 years. Again, quite pleased.

These are 100 times better than what came on the brinkman 810-1575 when it was brand new. My son did purchase real heavy duty stainless steel nuts and bolts at lowes. He drilled out the screws with a special bit he had, and made the holes big enough for the much more heafty bolts he had bought. The kid has his own HVAC business, it took him about 1/2 an hour to remove all the old parts, and replace them with the new. Just long enough for him to drink 1 beer, ha, ha. He even brought his own beer! His Dad held the flashlight, for him, as it was after 9pm, when the kiddo finished work today. It has been in the 90s, so he is swamped. Better than buying a new grill. These will not rust out, anytime soon. This came in 2 days, they delivered it on a Sunday, kid installed Monday evening. I could not be happier. Love Amazon Prime.

Very impressed with the durability of this product. Worth the money.

Es lo que esperaba

Es perfecto ya que cuenta con orificios de dos lados y no como otros que solo sale flama por el centro. Un muy buen producto. Si lo conecta y no sale bien la flama solo es cosa de ajustar la entrada de aire lo cual es muy sencillo con un destornillador.

Cambie todo lo de mi asador y lo renove quedo como nuevo

Quedaron exactas a mi asador y la comida con muy buen sabor