ModMic Accessory Combo Pack - 3 Magnetic Base Clasps with Adhesives

Used these as the original I received with my mod mic was starting to peel off. They last a long time so you don't really need this many, I'd say they last 2-5 years.

As many others have said, the adhesive here is too weak. More precisely, it's too weak compared to the magnet (which is quite strong and significantly stronger than it needs to be) which means every time you connect/disconnect the mic, you're burning durability. In my case, I'm already on the my third (sixth, if you count the magnets that came with my mic) from occasionally laying down with my headphones, causing the mic itself to pull the magnet off the headphones (if the adhesive/magnet were properly balanced, it would detach instead). You can extend the life of these with some gorilla glue dots, since again the base/magnet/mic itself are all fine, but obviously it's tiring to need to buy an nth extra accessory for an already niche (and priced as such) accessory that was meant to solve your problem. The deceptive and excessive "15 cable clips" to mask that you're only getting 3 magnets here is extra salt in the wound.

I used these mostly for the extra cable clips, but the extra mounts were useful when the adhesive from my old mount gave way.

Works fine, the adhesive has trouble on certain surfaces such as the sides of the AKG K371.

The adhesive is very weak and can be peel off easily. I use 3M double side tape instead which works ways better. Overall good product.

im so glad i came across this company makes all my mounting needs possible

I bought these since I have the mod mic wireless. They work just fine and the magnet is strong enough.

If you need a replacement magnet receiver for your mic, this is indeed the correct kit but be warned that it seems Antlion uses subpar double sided tape. I ordered these hoping they would have better double sided tape than the original but alas these were WORSE than the original. If you enjoy your mic like I do, then order this to replace the magnet receiver (if you lost it) otherwise just remove the old/default adhesive and use another one. I personally used some clear gorilla glue double sided tape that I found in a box, only had to use a small corner of it and it is sticking great! The one star rating is mainly due to the adhesive, since that is 90% of what this kit offers

Einwandfrei Passform, gute Haltbarkeit

Utilissimi da avere con il modmic ,perfetti

Accidentally threw my box of accessories when I bought the product and installed it on my old headphones (had it over a year and put it in a bad place), so I bought these because I needed the magnets to attach the mic to new headphones. The mic still works like new, and the magnets hold the microphone just fine. Tip: define the best placement for the magnet to hold the mic to your headphones, attach the magnet to the microphone and take off the tape that covers the back are the magnet and exposes the sticky side. With the magnet attached to the other magnet on the microphone, put your headphones on and attach the sticky magnet onto your preferred side. By doing it this way you'll know exactly where the microphone will sit in relation to where your mouth will be.

Has effectively saved me buying a new mic as without attaching the mod mic to my headphones audio quality is terrible. However with the new magnets and adhesive the mic is effectively working like new. Regardless $26 is a lot of money to pay for 3 tiny magnets and some plastic clips

Work as expected, good for when you have a few sets of headphones.