Kinivo HDMI Switch 4K HDR 550BN (5 in 1 Out, 4K 60Hz HDR, HDMI 2.0, High Speed 18Gbps, IR Remote, HDCP) - Compatible with PS5, Xbox, Nintendo Switch, Cable Box

After a lot of research I went for the Kinivo as an HDMI switch which was already supported by the Harmony remote system and it also the ability to disable Auto switching. This can be done by simply holding down the select button for a few seconds which changes the LED colour to green so you know it is disabled. (Nice touch). This device works flawlessly with Harmony. Only downside is the HDMI output is on the right hand side rather than out the back, which makes cable management more tricky. I am really pleased with this device though, well built and was nicely packaged.

Amazing item well happy with it as it answers my prayers and i have a 1 hdmi port projector and want to connect my soundbar by optical and my 4k player by hdmi and it plays them simultaneously with no problems so happy with it so without doubt it deserves 5 stars.

This works as expected, including the Toslink digital audio output. However, only 4 stars because of the design - Toslink audio cables are thick and impossible to hide, so the socket should be on the rear of the unit instead in the side. There is a helpful instruction leaflet (!) which saved me a lot of frustration because it warned me that the automatic HDMI switching will NOT work with Roku devices because they always output a signal even when on standby (not in use). The remote control is needed to switch between HDMI inputs, so make sure that the piece of plastic packing that insulates the battery is removed before use.

I had quickly used the available 2.2 HDMI sockets on my AV receiver and had been looking for a suitable HDMI switch. The Kinivo 550BN allows you to connect up to 5 HDMI devices to one HDMI socket. It handles 4K, Dolby Atmos, Dolby Vision and eARC. It’s small, similar size to an external hard drive and can be installed with minimal skill following the comprehensive instructions. In the box you get: 1 x Kinivo 550BN unit 1 x Power adapter (includes a Euro plug too) 1 x instruction manual 1 x Remote control It took me around 20 minutes to install the unit into my home cinema system. However, more simpler installations , between a source, the Kinivo and a display would be quicker. That being said, the Kinvo has one really big and frustrating feature, the placement of the sockets on the side of the unit. To the rear of the unit are 4 HDMI sockets, a further socket on the left side and a further socket and the power input on the other side. This may seem okay initially, but it makes finding a suitable location and cable management very difficult. I would rather the unit be slightly wider to allow all sockets be on the rear of the device. The instructions are very clear, even explaining why certain devices cannot use the auto switching function will not work. The auto-switching function means the unit switches between devices automatically, removing the need to use the remote control. I have placed the Kinivo between my Sky Q, a 4K blu ray player and 4K AV receiver. I was pleased to discover that the Kinvo allowed pass through (signals pass through the AV receiver without it powered on) and switched quickly between the two devices. Using good quality, branded HDMI cables I did not notice any degradation in picture quality. When I powered the Amp on, the Kinvo continued to work and automatically switched between devices. I played a movie via SkyQ and it was delivered in UHD with a Dolby+ (Atmos) sound. Switching to watch a blu ray, all sound formats, TrueHD, DTSHD, Atmos ect, played perfectly. It might be coincidence, but when watching Sky, the picture does appear to have become more defined with the Kinvo, however, that may just be coincidence. To conclude, the Kinvo BN550 is a cracking HDMI switch. It’s good value for money and I recommend it highly. Pros Small unit/footprint 5 inputs 4K UHD, 18Gbps, Dolby Atmos,Dolby Vision, ARC & Pass through Easy to set up and operate. Cons Location of HDMI sockets making cable management and positioning the unit difficult.

I've only had this switch box for a week or so, but it's doing a great job so far. It feels sturdy, comes with its own power supply and is big enough to be easily handled. My old switch wasn't much cheaper but was tiny and flimsy. So far, the performance has been rock solid, great picture quality, reliable device switching (it will automatically jump to the latest device to be turned on, but once that device is off, it jumps to the next available (active device) starting with input 1. This means you can easily set the TV to come on after you watch a DVD (for example) by connecting the TV to input 1. Overall, a very good switch box. You get the very odd drop out in sound, but I've seen that on all HDMI switch boxes that I've come across and it's not so bad that it's actually a problem worth investigating.

I’m only writing this as I’m sick of reading hundreds of reviews to figure out some answers. Bought the 3 port box rather than 5. This is a powered switch so takes up a wall socket so bear that in mind. You’ll also need an extra hdmi lead for the switch to TV part. Rigged up my Sky Q and kids Nintendo Switch in a 4K TV and it seems to switch flawlessly without using the remote. Gave it a go with the ps5 too and that worked as well and picked up auto switching. No picture loss and no jamming etc. Only thing I encountered when first set up is that the remote didn’t seem to work - so took battery out, and put back in and works fine, albeit the range is limited. Also encounters the occasionally switching problem if the Sky Q box goes into standby whilst using a different item but that’s a tiny inconvenience. Switching channels takes about 1 second. Made an expensive 4K tv with three ports into a six port tv now!

Use it to connect my Xbox Series X, Xbox 360 PS5 and PS3 to my monitor, it recognises inputs straight away so I can easily switch. I usually put my PS5 into rest mode and that allows me to auto switch to my other inputs.

Works as advertised. The Auto switch on device power up worked flawlessly. I had to adjust the power options on my Xbox Series S to ensure it actually powers off when i turned it off (it'lld normally just go into a standby mode), meaning the switcher would stick detect it as active. Had to the same for the Switch. Only con is the Odd arrangement of the output HDMI. Input HDMI 5 and the power jack are literally on top of each other when plugged in so there's that. Overall, Highly recommend, great device

Short review (to the point) Plugged in, powered up, and my Xbox lit green for 4K60 + HDR10 instantly. Apple TV 4K looks perfect. Auto-switch works; nice that I can disable it. Solid build, proper 18 Gbps/HDCP 2.2, no handshake fuss. If you need reliable 4K60 HDR across multiple inputs, this is the box. Long review: After two failed “4K” boxes that down-negotiated my signal, the Kinivo 350BN worked the moment I plugged it in. My setup: Xbox Series X and Apple TV 4K into the 350BN → TV’s HDMI 1 (UHD/Deep Color on). Powered from the included wall adapter. Results: Xbox shows green checks for 4K 60 Hz, HDR10, 10-bit in the TV details screen. Apple TV runs UHD 4K flawlessly; with Match Dynamic Range/Frame Rate enabled, HDR content pops and menus stay clean. No flicker, no HDCP tantrums, no color banding. Why it works: Proper 18 Gbps / HDMI 2.0 bandwidth, HDCP 2.2, and an auto-switch you can toggle off if a streamer stays “awake.” The remote is simple, port LEDs are readable, and the metal chassis feels solid. It’s not a 2.1/120 Hz device—and that’s fine for a 4K60 HDR setup like mine. Tip: Keep HDMI runs short and power the switch from the wall, not a TV USB port. If your TV has a per-port “UHD/Deep Color” option, enable it. Bottom line: Zero handshake headaches and full-quality 4K60 HDR10 from both Xbox and Apple TV. This is the one I wish I bought first.

The device worked just as described for about three months - easy, simple, no problems. There was no detectable video or audio degradation, and it made stripping the audio out to send to my old-fashioned hi-fi stack a breeze. Unfortunately, after a few months the audio output stopped working - one afternoon I went to watch The Dirty Dozen and the HDMI switching still worked, but there was absolutely no audio output from either the Aux or Toslink jacks. I followed all the basic directions for trying to get it working (the usual 'perhaps the user has been an idiot' suggestions, which *do* normally tend to fix things), but nothing helped. At this point I contacted Kinivo's customer service describing my problem, and they offered to send me a replacement. And it showed up literally two days later! Keep in mind, this was well outside the return period (and I didn't attempt to request one) and they didn't have any proof that the issue was covered under warranty, but nevertheless they sent one out to me post-haste. Excellent work; I went from frustrated to relieved and they've got a satisfied customer leaving a comment - which I almost never do.

I have an LG UltraGear 48 inch gaming monitor that can handle PS5’s top graphic settings when plugged directly into the HDMI input. However, I also have a Macbook Pro, Apple TV and Ipad Pro 12.9 that I also want connected to this monitor. Now the obvious and most simply solution would be to just plug each device into its own input and move on with my day. Endlessly going into input settings and switching the HDMI input manually and the quick input switch selection on most monitors usually forces you to cycle through all the inputs! NOW it is 2024 and who has time for that?! It is very clear there is a need for a simple desktop device that can easily switch the input direcltly using a button or a small remote WITHOUT loosing any the amazing sound and video quality of these next gen A/V devices. I tried every option i could find on Amazon, at Best Buy, on Reddit and NONE would push the full 120hz 4k/60hz 8k signal they boated to retain. I promise even the most respectable brands like ANKER, UGREEN or INSIGNIA had options that simply would not push the signal 100% correctly. I also tried the off-brand switches that look just like this one which promise the same specs and they still did not work. The closest i got was the UGREEN 8k 3 port HDMI Switch but it could not push the full 120hz framerate at 4k only 60hz at 8k. At the end of the day a jump from 60hz to 120hz is MUCH more notable than a jump from 4k to 8k which is barley noticeable in screens smaller than a movie theater. FINALLY i decided to just buy every option and return the ones that did not work. THANK YOU AMAZON because i finally found it. This is the switch of switches, it works like a tank and i have verified 100% full lossless audio and video using several methods I learned while testing the other switches. i even am able to route the audio out of the headphone jack of the monitor into my KRK Subwoofer, which acts as a Audio hub for 4 krk rockit studio monitors. THE SOUND IS PERFECT even with super sensitive studio monitors that are built to notice even the slightest imperfections. BEST BEST BEST. dont waste your time with anything else or let anyone convince you the only way is to directly connect to the tv. THIS SWITCH WORKS AND I AM SO HAPPY!