Edelbrock9265 Square-Bore Heat Insulator Gasket

Nice quality product

Good quality, easy install

Worked great and was impressed by the quality.

I used it on an Edelbrock performer 289 with an Auto-Lite 4100 carb. Cured the vacuum leak issues with this intake and carb combo.

Had a fuel percolation problem with an Edelbrock 1406 4 bbl Carb.Live in Phoenix , problem started one day last month at 116 degrees. Fuel boiled even tho engine temps were normal on temp gauge and on laser temp gun.All fuel boiled out of carb causing car to stall.would restart after cooldown or by pouring some fuel or spraying starting fluid into carb. Went on line to Edelbrock site, found this item ,purchased same.Like all Edelbrock products they perform as stated.Also replaced fuel pump, all lines from pump to tank, pump to carb(edelbrock specific parts), Tank dropped cleaned out and strainer replaced, Carb dialed in by Chuck's Speed Center in Phoenix, who also performed all work . After it was finished it sailed thru emissions check.Now it's again the sweetest running 87 El Camino in AZ.Thanks to Lance Carsten @ Chuck's Speed Center. OH Yea! Forget about calling Edelbrocks tech help line.It's a waste of time. Their Products are great,However

Installed on my 67 mustang with a 351w using edelbrock 1405 carb. I believe it Helped with vapor lock as before I was having a problem with it starting up after a quick drive. Now it starts right away. I installed an edelbrock gasket before n after as well.. Downside is that it did not come with long enough bolts. I had to go to the auto parts store and get a set of longer bolts.

Works great, helps solve 50% of the fuel vapor issue.

Fixed my Heatsoak/hard start problems I was having. The only reason I'll give it 4 stars is this should already come with carb or be recommend as an add on when you buy it. I don't feel it should be sold separately.