Inc. Tub Spout Diverter Repair Kit Chrome

Works great to fix our problems of shower faucet. Just be sure to use a file to clean up the surface that the washer ultimately presses down on. Easy to assemble. Just needed some needle nose pliers to remove the old piece.

Fixed the faucet in my mobile home tub as advertised.

After 20 years the shower diverter in guest bathroom was leaking badly & lost a lot of flow to shower head. This kit fixed it like new. Not a bad idea to just replace the spout & diverter. Old spout has to come off anyway. You’ll need plumbers tape (Teflon tape), a large rag to protect spout during removal, and a wide jaw pipe wrench, pliers or vice grips that open large enough to grab old spout. User tip: easy job if you a little handy & have right tools on hand. You will need to remove old spout. Not hard, but won’t come off by hand. Wrap a large rag or towel around it so you won’t damage the finish on spout. Using a large pipe wrench or large pliers or vice grips turn the spout counter clockwise. (Lefty loosey) it should come off easily. Follow instructions to take out old diverter parts and install new ones. IMPORTANT: Clean off old plumbers tape on water outlet and put on several layers of new Teflon tape. Screw it back in place clockwise until tight and pointing straight down. Your done.

Great service and quick delivery. Nice product. Unfortunately does not fit my Kohler. The “tines” are shorter per the pictures. The thickness of the wastegate is also a problem but grinding it down will just move the tines further away. Kohler doesn’t sell it and none of the big box stores in my area carry it. I put the rubber insert in my old wastegate and it fixed about 90% of the problem (wastegate has some wear too.)

This works great as a replacement part if your tub spout wont stop leaking water when trying to shower. Ours (tub spout) was corroded unfortunately and I had to get a replacement from the company, so this specific part didn't help in our situation, however it matched the new one exactly. I would recommend!!

This is a perfectly good product if it fits, but in my case the gate -- the plastic part that the gasket fits into - was too thick to fit into my 12-year old Delta shower spout. I ended up re-using the old gate and just replacing the gasket.

Worked like a charm. Old one corroded out. This has the diverted working like new.

The sidewalls on the plastic slide are too thick to slide into the grooves in the tub spout. The prongs on the slide are too short. I could only use the new rubber grommet and the metal stem that came with the "kit". Before going on, I should mention that I spent 2 1/2 hours soaking the mineral buildup on the inside of the spout. I used CLR and vinegar to soften it. I used a plastic spoon that restaurants put in your take out bag to scrape the softened calcium from the surfaces of the metal spout. It is important to clean the sealing area thoroughly without scratching the metal. The old plastic slide was cleaned the same way. Putting it all back together, I noticed the new rubber grommet came nowhere close to touching the sealing surface of the spout. I had to add a buna-n o-ring behind the grommet to get it to touch the metal seal area. Finally finished, I tested with the shower spray on, and was not impressed. The diverter still leaks some water from the tub spout while running the shower, although it is not nearly as bad as before my efforts. Bottom line; Don't waste your time and money on a "universal" Chinese made rebuild kit. In fact, ANY rebuild kit. Buy a new diverter spout from a reputable manufacturer such as Kohler, Delta, Moen, or if you prefer, have a pro plumber do the job for you. I do not recommend Danco anything.

This my second time buying this diverter kit (for different bathrooms). Works great, easy to install. In some spouts, you might have to file it a bit so it fits

We were wondering if we should call a plumber. Im glad i didn't! Found this product in a youtube video to fix my shower which wasn’t working properly. Was able to easily fix it myself. Thanks again!

Fit perfectly, I generally don't have much luck with the 'fits most' (except yours) but this worked well. Price is high for a 2$ part but beats the alternative.

Installation rapide.

Yes...my shower didn't work for a year, I found this on Amazon and fixed it by myself in no time, easy to install and it worked! I can finally use the shower again