VideoSecu LCD LED Monitor TV Wall Mount for 19" 20" 22" 23" 24" 26" 27" 30" 31" Flat Panel Screen Maximum Loading 66lbs VESA 75/100 Ultra Thin Mount Bracket 1EA

Excellent mount to use a monitor as a family calendar. Hugs the monitor very closely to the wall. All you’ll need is a way to hid the cords and it’ll look like it was made to be there. Easy to install and comes with high quality parts. I highly recommend this mount. My monitor is a 32” LG

Very easy to install. Works great. Fine quality.simply screw the back piece to the wall (on a stud) and attach the other piece to the back of the TV and slide the two pieces together.It's not meant for large TV's, but worked perfectly for installing a 22" in my trailer.I did note that one of the screw holes was a millimeter or so off center from one of the holes on the TV, but it wasn't much trouble coaxing the mounting bolt into place. It comes with a few different sizes of mounting bolts to accommodate the differences in TVs.As has been said, it does mount the TV very close to the wall, so if the TV is also very thin, swapping cables might be tricky.My only warning is that if you are installing this in a confined space, such as close to a ceiling, or in in a cabinet, you will need to have at least 6 inches above where you want to your TV to be positioned in order to slide the TV plate into the wall plate.

For under ten bucks this is an amazing product. It works perfectly!The quality is solid and the design is simple. There's only two pieces. One slides into the other. You mount one plate on the wall with 4 screws and the other plate gets screwed to the monitor with 4 included screws.The package comes with 3 sets of machine screws in different sizes for mounting the other plate to the screen - so the screws you need for this will probably be included in one of those sets.The whole thing is very slim - the back of the screen mounts about 5/8" away from the wall - that's just about the closest you could possibly expect with any mount.HIGHLY RECOMMENDED!

I decided to set up a secondary stand up workstation for my work from home needs. I decided to go for this low profile mount for a 27" external monitor since I don't need a swing out arm that extends away from the wall. The mount comes with a variety of screws to use with your monitor. Unfortunately, my monitor's VESA mounting holes were recessed so the included screws were too short. Luckily, I had some longer screws on hand and I was able to make the mount work. This is not really the mount's fault but it's worth noting that you might need longer screws. It's also worth mentioning that the instructions say that the mount MUST be installed into a wood wall stud or solid concrete wall.The mount comes in 2 pieces with one piece going on the monitor and the other going on the wall. After both installing both halves, you slide the monitor down onto the wall mounted piece. This was a little tricky but doable. After I initially slid the monitor down into the wall mount, I couldn't install the power cable and the hdmi cable since the space was too tight (about 1/2 an inch). I ended up removing the monitor, installing the cables, and sliding the monitor back down on the wall mount with the cables hanging down. If your monitor's connections stick out from the back, this mount might not work or you might need cables with 90 degree connections. Luckily, my monitor's connections are on the bottom so this mount works with standard cables.Overall, it might be a little tricky to install the mount depending on how your monitor is configured but the end result is nice and tight to the wall. Seems pretty stable too.

Even came with very short screws to mount the TV with. Works as expected and solid heavy metal construction. Easily would support a much heavier TV than my 32" LG at 19 lbs.I am using two of these in my office and guest room so I can slide the TV out of my office and into the guest room when we have company.***Take note: In my case, it was actually too close to the wall to allow the cable coax connection because of the location and angle of the connection on my TV. I added a piece of 3/4 inch plywood behind it to provide the extra space. I may add a in-wall connection box later to solve this, but works/looks perfectly fine with the plywood behind it. This was not a negative to me because frankly, I can't understand who thinks it's a good idea to have the cable connector pointing towards the wall rather than down.

It does exactly what it purports to do: Mont a VESA monitor something like a half inch off your wall. Any thinner would be a drawback.If you have a really thin monitor, there won't be enough room for fingers behind it when you have it on the wall, so think about connecting the cables before hanging the panel.It doesn't pivot and you might find that you want it to pivot because the angles aren't perfect - tough luck! The price we pay for flush to the wall is that there is nor room for pivoting. In my application, I put up with suboptimal angles because I need it to sink into the wall as much as possible. For me, if it stuck out any more, the panel would obscure another monitor that I can't move.So think carefully about if you need it to pivot! If you need to pivot, this is not the mount you are looking for. Actually, it's the other way around - this is the mount you want ONLY if getting it as close as possible to the wall is the most important thing.

As advertised for a LED Monitor - this was a bit of a disappointment. I setup a Dell Dell P2715Q/P2415Q monitor for table top gaming so that I could project the map. After time, these things seem to collect in the house, so why not? Anyway, when you remove the monitor stand, you see that the VESA plate is in a recessed area, it is not flush. Hmm, OK, give it a whirl - and I could not get the slide on piece to fit because the depth of the recess. This occurred because the two screw plates that attach the two pieces together sit very low.SO - suitable if your VESA is flush / flat across the back of what you are mounting to, $7-$8 additional parts needed if it is in a recess.Parts I needed - for a Dell P2715Q -> M4 18MM screws and 1/4 inch nylon spacers, available at any local big box hardware store.

I've purchased several brands of TV wall mounts, but this one is superior in all aspects. It was used to mount a 24" Samsung in a guest bedroom. The device comes with all kinds of hardware for mounting the wall plate and the various screws of different diameters and lengths for the TV bracket as required by the TV brand. The outstanding feature is the no rocket science procedure to attach the TV to the wall bracket. Simply place the TV above the wall bracket and lower it into place after the two brackets are installed. The two brackets mate perfectly and it's done. No fancy hard-to-reach screws to tighten once on the wall and no complex self-locking mechanism to figure out. This is important if you need to change to another TV or reconfigure wiring in the future. Just lift the TV up and off the wall, make the changes and slide the TV back in place and you are good to go. The mounting assembly is quite thin, but allows plenty of room to run the COAX cable, power cord and HDMI cable (if required). My new TV is virtually flush to the wall and no bracket is visible. Buy it now and you will not be disappointed, rest assured. Thanks for listening.

Sturdy and easy to install. Locate stud for added strength. Mount wall bracket, mount the other bracket to tv or monitor. Slides unit in place.

Great light duty mount. Very slim.

Excellent. Super strong.