Sink Soap Dispenser Extension Tube Kit (Anti-Backflow, 47")

Easy install. Refilling the little bottle was always a pain. Acces and filling through the small top took a while, so the bottle always sat empty. Thos hose makes it so easy. Multiple adapters to fit different size bottles. Just stick the hose in the bottle attach it to your pump and you are done.

Easy to put together. Very reliable design. Works like a charm. This is the 3rd time I’ve had to replace the soap dispenser. This one looks like the last.🤩

If you are tired of crawling into your sink cabinet every few weeks to unscrew that tiny, soap-covered plastic bottle, you need this kit. It is one of those simple "quality of life" upgrades that makes you wonder why you didn't do it years ago.What’s in the Box:The kit is surprisingly comprehensive. It comes with a 47-inch food-grade silicone tube, an integrated check valve, and four different bottle caps designed to fit almost any standard dish soap container (from small bottles to the giant Costco/Sam’s Club jugs).Why It Earns 5 Stars:The Check Valve is Key: This is the most important feature. The one-way valve keeps the soap "primed" at the top of the tube. Without it, the soap would drain back down into the bottle after every use, and you'd have to pump 10 times just to get a single drop. With this kit, the soap is there instantly, every time.Massive Reach: The 47-inch hose is more than enough length. I was able to tuck a giant 90oz bottle of Dawn way back in the corner of my cabinet, completely out of the way of my cleaning supplies and trash bin.Universal Fit: I was worried about the cap fitting my specific brand of soap, but the kit includes multiple sizes. The silicone stoppers create a snug seal that prevents the "soap smell" from wafting through the cabinet.Easy Install: It took me about 5 minutes. You just remove your old small bottle, push the tube onto the pump's intake, and drop the other end into your bulk jug.

I accidentally found this product and have to try it.I hate spending 15 min every few weeks to fill the Moen countertop soap dispenser and spilling soap every time.Easy install.. clear instructions.. took me lesser than 5 min to put together. I used an extra soda pop bottle to hold 70/30 mixture of soap and water .. I think any the coke bottle would work also. I did not sent to use the Dawn bottle since I was not sure if this work or not. But that will also work.

Good and easy to set up

Horrible instructions. I.E........THERE ARE NO INSTRUCTIONS, WHATSOEVER.1) The hose is long probably to pull bottle out to change easily, or if you want to put the bottle in an adjacent cabinet, even.2) You can cut the hose as short as wanted that works for you.3) The 'coupler'/one way valve (if it is one ??), I would think is best off near the supply bottle.4) The hose can attach to the existing stiff suction feed tube already on your existing pump, or you can pull the rigid tube, & attach the hose to the slightly larger diameter of the bottom of your existing pump right to your manual pump dispenser.5) The 'cable clips' do not need to be used, unless you want to. They can be tossed if deemed not needed...........they are not necessary................6) I do not think the tube routing does not need an 'S' SHAPED LOOP IN IT.......... Mine works fine w/a relatively straight run, but with some extra tube length to pull the bottle forward for changing.

Easy to install. Makes the soap dispenser on the sink so easy. Just install it on the pump then put the line in a large dish soap container and boom! No need to change the soap dispenser every day. Came with different adapters for the soap container. Easy to use. Would recommend

Refilling my soap dispenser was a pain and always involved spilled soap regardless of which trick I used to get the soap to flow smoothly into the dispenser. I have been using this kit for 6 months and have had no problems with it. Installation was easy and as I use the super sized bottle of soap from Costco I expect I won’t have to change it for a long time.

Las instrucciones que vienen en el paquete no son muy claras, pero viene la dirección de un video de youtube donde te explican como hacerlo y fue bastante sencillo... probé el producto y parece ser que funciona muy bien.Después que lo utilice más doy un update en el review del producto.

Funciona correctamente, material de buena calidad.

I only cam across the idea of using this tube when my kitchen was being remodelled and it was a tight fit to get the bottle in under the counter. The guy taking the measurements for my counter gave me this idea as a solution. I went on Amazon and low and behold, here it was. I purchased it right away. The only thing is with this this kit the provided caps don't work with my Costco sized Dawn Platinum. I simply took the existing dawn cap and cut off the top, shimmed the inside hole so that the tube would fit and that was it. Took a couple of pumps to get the soap up the tube, and now it works like a charm. Definitely recommend. A must have if you have a built in soap dispenser!

Pros:It actually works!Gets to the bottom of the big dawn bottle that you get from Costco and lasts for a super long time!Hooked up to my already there soap dispenser.A few caps for different bottles.Con’s:The cap on the top of the bottle is a little lose. (But still works)The first time will feel like you’re pumping forever to get the initial liquid soap out of the dispenser. (But once you get there it’s good).

I have been using this product for about 5 months and I love it. It was so annoying to have to top up my soap dispenser. With this product, I bought a jug of Dawn and haven't had to replace the jug yet. Gamechanger in my kitchen!