Tire Pressure Gauge with Inflator, 100 PSI-ANSI B40.1 Accurate, Large 2.5" Easy Read Glow Dial, Heavy Duty Air Chuck and Compressor Accessories with Rubber Hose and Quick Connect Coupler

I recently purchased the tire pressure gauge and used it for the first time a few days ago. I am very impressed with the quality, especially given the price. The gauge performed well on both my SUV and my wife’s car. The needle is accurate and easy to read, and the product definitely does the job. I look forward to seeing how it holds up over time.

I wanted an accurate tire pressure gauge/inflator that I can leave hanging in my barn where I need it most and not leave my expensive MAC digital gauge hanging out in the damp air. Also needed it to read below 20 psi unlike a few other post style gauge/inflators I have. If you have lawnmowers, tractors, atv's or dirtbikes that are lower PSI tires, this will work good. Most analog gauges I've purchased over the years are off by a few PSI or some up to 10psi off, which had been a problem as a tech when the TPMS systems became mandatory on vehicles as none of them ever matched what the TPMS system would have and you would constantly need to adjust pressures after doing tire jobs non stop all day, once they were learned and on the vehicle. (That ended with the higher end digital gauge I purchased) This does the job well, Is reading out exactly on point with the digital gauge. This is great that it doesn't go up above 100psi where most tire gauges never need to go, leaving you with a less cramped gauge face and more accurate readings. Also in low light you can hit the gauge face with a light and be able to read your pressures. You will most likely want to pull the fitting and air chuck off and wrap the threads with pipe tape. I pulled the rubber bushing "Seals" out of those connections so the pipe threads would go farther in and do their thing and seal up nicely with the tape on them.

I recently upgraded from an air pump to a compressor for a problem tire on my car. Since I have to fill it so frequently I wanted a filler with a gauge. So far my only problem is with the tire valve chuck. As many other reviews have said, the chuck doesn't stay on the valve well and leaks air from the tire. One review said to pull out one of the two thread-catches, but that didn't work in my case. I'll be buying a new chuck, I haven't decided from whom. It's interesting to note that the pics of AstroAI's replacement chucks only have one thread-catch, but the chuck that comes with this gauge has two. And, those two catches are closer to the end of the chuck, I think the they're missing the threads entirely. Not only that, but in two of the pictures of this product there is a single catch but there are two catches in the main photo. [EDIT: I'm guessing that where I see one catch it's a CAD image rather than a photograph.] The rest is fine. Air hose connection is solid. Pressure readings match my stick/pen gauge as well as the car's TPMS when I hold the chuck seal manually. The trigger adds air, the "reset" lets it out. EDIT: I bought a pair of new chucks, AstroAI brand. In the picture the top one is the new one and the bottom is the one that came with the inflator. As I mentioned I did alter the original chuck, I pulled out one of the thread-catch teeth. But look at the differences here: the replacement chuck is far beefier, has a better lever action, and the thread-catch is set deeper into the chuck, which makes it possible to actually catch the threads of the tire valve. The teeth on the original chuck are way too far out, they skip past the threads, which is probably the cause of most of the bad reviews. It's a shame that AstroAI makes you go thru this replacement process when they have WORKING chucks on hand. Feels like a double-dip to me. Like, "buy our product, then buy more of our products to make the original product function as it was advertised in the first place." One thing that seems like common sense but maybe isn't, when you put the chuck on the valve stem, align it so there's nothing in the way so you could give it a quarter or half-turn after. IF you've caught the threads correctly you can give it a twist and make a better seal.

Outstanding product for inflating tires or other inflatables. Very accurate and easy to use. The gage illuminates so you can see exactly how tire pressure you are using.

Love this gauge. Never have to go looking for a pressure gauge again, its all in one. Works great, makes airing up things a breeze.

Nice attachment for filling air in tires on my car. Awesome gauge on it. Works well

A very accurate guage. A good product at a very good price.

Works as expected. The tip on it does not quite clip tightly enough and has to have constant pressure to seal well. I changed the head on it to a 6 inch extension that is easier to hold and apply pressure.

Un equipo muy bueno para inflar llantas con una compresora. Trae adaptador de sellado rápido para manguera de compresora. La boquilla que se conecta a la llanta se fija fácilmente y sella bien. El gatillo permite al presionarlo inyectar aire a la llanta y al soltarlo medir la presión de la misma para saber si es necesario presionar nuevamente. Super cómodo no tener que estar desconectando la boquilla para estar midiendo la presión de las llantas. 100% recomendado.

Broke after 1 week use.

Fácil de usar, precio económico y muy útil para mis vehículos

muy bonito funciona bien para el precio no seme ocurrio comprar dos pero cuando este otra ves a precio bajo lo are

MUY BUEN PRODUCTO,MATERIALES DE CONSTRUCCION MUY BUENOS,LO RECOMIENDO AMPLIAMENTE