P3 P4400 Kill A Watt Electricity Usage Monitor

Installation: literally plug-n-play. Very straightforward with no surprises . Versatility: Works well across different setups and applications, giving you flexibility in how you use it. Value for money: Priced fairly for the performance and build quality you get. Safety: Feels secure in use with no concerning heat, wiring, or stability issues. Power: Delivers consistent power without drops or fluctuations during operation. Size: Compact enough to fit in tight spaces while still being easy to handle.

Accurate, Simple, and Addictively Useful The P3 Kill A Watt Electricity Usage Monitor is one of those inexpensive gadgets that quietly changes how you think about energy use. I first bought it to see how much power my old refrigerator was pulling—and ended up testing every appliance in the house. Setup is instant: plug it into the wall, connect any device, and the bright LCD display immediately shows volts, amps, and watts in real time. Leave it running for hours or days, and it totals up the kilowatt-hours (kWh), letting you see exactly what that appliance costs you per day or month. What makes it so helpful is how accurate and intuitive it is. You don’t need to be an engineer—just read the wattage and multiply by your utility rate. I found a few “phantom” power hogs drawing 10–20 watts even when off (like a cable box and an older UPS). It’s also great for testing PC builds, aquarium setups, or any electronics to ensure your power supply is sufficient. The build quality is solid, and the display remains easy to read even after years of use. The only caution: it’s designed for 115V North American outlets only—not for international use. Bottom line: A must-have tool for anyone curious about energy use or looking to cut electric bills. Simple, accurate, and surprisingly enlightening—it pays for itself quickly.

This product works as expected. I purchased this unit to make an analisis about parasit power consumption in my electronic appliances in home. I discover the following: - the lcd requires 180 ~ 230 watts. After going to standby or shutdown, the tv use 60 watts for 3 minutes. This is to cool down the lcd lamp for protection (fans and additional circuit works for this time). Can be a mistake if I remove the AC cable power or enterely shutdown the tv without allow this process to finish. Good discover. After this 3 minutes, the standby mode on the monitor only requires 05. to 1w. - my motorola cable system requires the same ammount of power (27 ~ 30 watts) no matter if this unit is ON or off!!!!... all the time is fully powered (because have an internal hard drive). But I believe (wrong!) this unit must save about 50% if is off.. but no!!!! - the blackberry / sony ericson chargers do not drain any power (0W) from AC if the phone itself is not connected. I DON't need to disconect this chargers from the outlets. - My APC Smart UPS 1500 drain 30 WATTS! even when is completely turned off!!!Is better to disconnect this unit from the ac cable!!! amazing!... - My pc (dimension 9150) is a power hungry pc. Because have pentium D (first edition) who requires a lot of power. This pc requires 230 watts but when I play Command Conquer (3D real time strategy) and because I have a HD2900 ATI High Definition card who requires 650 watts PSU. Interesting: when I play the game the power rise from 230 to 300~320 watts!!!! This unit is very usefull to understand how the electronic systems works and if are energy efficient and how you must manage this units to save power and money. Highly recommended, is cheap and you can check your ac freq and exact voltage (i have 128 volts from 127 expected in the ac line)...... enjoy and sorry my english

The Kill A Watt Energy Monitor (I have the P4400) can be mighty useful for determining energy usage of plug-connected devices, especially ones with varying usage, such as refrigerators, plug-connected air conditioners, humidifiers and dehumidifiers, and perhaps computers. I got mine in 2018, so it may not be quite the same as current models. A few things could be improved: • It would be mighty nice for the display to have a backlight. But, unlike some others, I have no problem reading it when shining a flashlight on it in a dark location. • For some devices (e.g., a refrigerator), it can be mighty inconvenient to read without using at least one extension cord, which is a bit Mickey Mouse. A Kill A Watt Connect (https://www.amazon.com/dp/B0CVS4WXM9) might address this, but some have suggested the 32″ connecting cable is on the short side. I don’t have that model, so I can’t comment from experience. • When plugged into the top outlet in a duplex receptacle, it blocks the lower receptacle. Again, a short extension cord could fix this. • As several others have noted, the outlet receptacle is mighty tight. Not so tight as to be unusable, but much tighter than a normal receptacle—and it doesn’t have the same feel as a hospital-grade receptacle, which is also pretty snug. • There is no battery backup, so acquired data are lost in a power failure. Power failures where I live are infrequent, so this isn’t a big deal for me. There are other models that do have battery backup. This model doesn’t calculate energy cost (some others do), but this isn’t a big deal for me; I think it’s probably easier to just put the energy consumption data in a spreadsheet and figure the cost there. There are some other brands that cost less and even have more features; I haven’t tried them so I can’t really comment. I haven’t felt the need for most of these features strongly enough to try another model. Were it possible, I’d probably give the Kill A Watt a 4.5. A Poor Man’s Clamp Meter? For devices like a hair dryer or toaster that have relatively constant consumption when in use, I’m not sure it’s necessary to accumulate months of data unless one is a real fanatic—so a quick measurement will often suffice. Though intended for monitoring energy use, the Kill A Watt is also an economical substitute for a clamp meter and line splitter. I have a hard time believing that it’s in the same league, but the specifications suggest otherwise—and the indicated values are very close to what I get with a Fluke 87 and i400 current clamp. For someone who’s not an electrician, the Kill A Watt may well be good enough, and it’s easier to use and less expensive. One big convenience: it’s easy to quickly switch between current and voltage under load at the press of a button, which is much harder to do with fancy meter. The Kill A Watt also provides watts, VA, and power factor at the press of a button. Results can sometimes be surprising: I have one low-flicker LED bulb with a power factor of 0.7, while this isn’t great, I remind myself that the VA is still a lot less than that of an incandescent bulb with a unity power factor. And it’s interesting just to know this stuff. For this purpose, the Kill A Watt seems better suited than some of the newer models with extra features that don’t really apply.

I purchased this product to keep an eye on my electrical usage of accessories, including heaters in my garage to make sure they are not overloading the system. Works as expected and quality made and seems to be very accurate.

This is the original Kill A Watt meter. It gives you voltage, amps, VA, power factor, frequency, KWH, and hours since connected. Makes it easy to check various appliances for cost of operation. Also very good if you use a backup generator to verify the voltage and frequency of the output.

Works as expected. Just plugged the coffee machine into mine to see what the draw is when it's not running. Make sure you read the manual and set the $/kwh so it calculates it correctly for the cost in your area. It does take some time to come to equilibrium on that so leave it for a bit.

These things are fantastic. They're very helpful to keep track of the amps we are pulling when we have larger shows. It shows you the Watts and Amps. It has some other great features that we don't use but it's nice that it's there. I highly recommend this device when you want to make sure you stay within the amperage limits of an outlet especially.

If you live in the UK, do NOT buy this product. It is not designed for the UK and you will have to return it. The company, so far, has refused to pay the return postage, even though this is entirely their mistake. I have no idea why it is not clearly labelled.

Fantástica compra, cumplió todas mis expectativas y al tener un soporte de hasta 1.8kw me permite medir dispositivos de alto consumo. Quien iba a decir que mi PC (solo el gabinete) consume 4 veces mas que mi refri de 7 pies. Gracias a esta maravilla, ahora lo sé. Recomendadísimo, entrega en excelentes condiciones y vino empaquetado con su bolsa antigolpes.

1. Operating voltage is incompatible with Japan's 100VAC. 2. Seller support is poor and maker (P3) doesn't respond to emailed questions. A waste of money.

This electric meter has been amazing so far. It has five easy to manage buttons to Switch between important things such as watts, amps, volts and hertz (also kilowatt hours). The readings seems fairly accurate so far from what I can tell when looking at the readings. It isn't overly complicated and gets the job done well. It's a great way to really see how much power your electronics are using at a given moment (watts) or over time (kilowatt hours). The only challenge so far is making sure there's enough space to fit the Kill A Watt meter. It is a bit wide and tall so may not always fit where your electric outlet is (ie: a power bar). This is a bit older of a product but as long as it does the job well, who can complain? Definitely worth the price.

Bought this on Amazon UK and it does not state that it is not suitable for UK use - plugs are US(?). Will now have to pay a lot to return it to a US address. Not impressed.