Hilitchi 40 Pcs Binding Posts Terminals 4mm Banana Plug Socket (20pcs) + Red and Black Gold Plated 4mm Banana Plugs(20pcs) for Arduino
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

Hilitchi 40 Pcs Binding Posts Terminals 4mm Banana Plug Socket (20pcs) + Red and Black Gold Plated 4mm Banana Plugs(20pcs) for Arduino

4.0/5
Product ID: 128676336
Secure Transaction

Details

  • Connector Type
    Twist
  • Contact Material
    Gold-plated
  • Insulation Material
    Plastic
  • Terminal
    Ring Terminal
  • Material
    Zinc alloy
10,000 plug test
🏆24K gold plated
🔌4mm compatibility

Description

🔗 Connect with Confidence!

  • 🏆 PREMIUM QUALITY - Crafted with 24K gold plated copper for superior conductivity and durability.
  • 📦 COMPLETE PACKAGE - Includes 40 pieces—20 banana plugs and 20 sockets—perfect for your projects.
  • 🔧 EFFORTLESS SETUP - Twist-on design allows for quick and easy installation, saving you time.
  • ⚡ TESTED FOR EXCELLENCE - Endures over 10,000 plug cycles without compromising performance.
  • 🔌 UNMATCHED CONNECTIVITY - Experience seamless connections with 4mm banana plug compatibility.

The Hilitchi 40 Pcs Binding Posts Terminals set includes 20 banana plug sockets and 20 gold-plated banana plugs, designed for optimal performance in various applications, particularly in audio and power connections. Made from high-quality materials, this set ensures excellent conductivity and durability, making it a reliable choice for DIY enthusiasts and professionals alike.

Specifications

Material TypePlastic
Contact MaterialCopper
TerminalRing Terminal
Connector Type Used on CableTwist
ColorBlack, Red

Reviews

4.0

All from verified purchases

A**E

ABSOLUTELY A LAST A GOOD BANANA SET

A++. . . Excellent binding post plugs & socket connectors better than many other brands we bought before. Its construction is much stronger and more rigid, it is securely attached to any material where you install it.The plugs connectors have screws to adjust cables and wires of gauges number 10 onwards as well as you can solder if you want. And the best of all is that when you insert the plug into the sockets it "goes in" without problems and stays fixed without being loose or coming out due to any movement.((( Not like other brands that we have bought before that are loose: - The connectors are loosened from the cases, the diameter is not the same as the plug, others enter the socket connector with difficulty that until many times don't fit well or the plug must be closed a bit or open a bit it depending on the situation and this affects terribly when taking measurements and electronic calculations for not having good contact between plug & socket- )))Great connectors make our safest and most reliable Electronic Life. We were also impressed by the gold plated that it has as this prevents oxidation and there is no static or bad conductivity between connector and plug, as well as when connecting it has no resistance due to sulfur oxidation and it enters smoothly. Those from oldies or cheap quality brands that they sell you a lot for a couple of dollars "when they rusted and sulfated" you must sanded to remove that rusty layer to get enter to make contact...We are very happy with those banana binding post set. . . Definitely we will buy more next month for our Solar Project Program... We recommended 100%Thanks!

M**E

Lab Power Supply Modification

Worked as expected.

S**R

are ok

These are ok, not relay the best but get the job done if it is 14+ gauge wire, better suited for 12.

W**.

Adequate Banana Connectors

These connectors offer reasonable value for their cost, as long as you manage your expectations accordingly. They are priced affordably, and their quality is aligned with their price point.The set screw is relatively short, making these connectors suitable for thicker cables, such as 12 AWG, commonly used in speaker setups. However, if you're planning to use thinner cables, like 18 AWG or those with minimal insulation, you might encounter difficulties.Each plug I received had its leaf springs collapsed—these are the flexible metal strips around the sides of the plug. Despite this, they are soft enough to manually adjust with a small screwdriver. This fix is a temporary solution, as the springs tend to easily collapse back to their original state, which makes these connectors less ideal for setups that require frequent unplugging.The material used is relatively soft, possibly too thin, which can lead to issues when tightening the set screw, resulting in a connection that may become loose over time and no longer adjustable.For their price, these connectors are adequate if you keep your expectations low. However, they are not suitable for projects where durability and frequent manipulation are needed.If they were a tad more expensive I'd rate them with three stars or less, but at their price point, I think they are OK. I would not buy them again though.

V**2

Good value

If I could complain about anything it would be nice to get more for the price but that's because, why not. This was exactly what it says it is. If you read some of the comments the ones that are negatives I did not encounter. I'm a diyer so if it is for a bigger gauge wire I'll make a bigger connection. The one about not being able to connect it to metal probably didn't actually remove the nuts and the plastic posts in the middle that the metallic shaft goes through. But hey if it's too difficult to figure out buy something that someone else made and don't be a diyer

R**G

Junk!

I didn't expect Pomona quality for this price but I did expect something usable. The sockets are okay except the mounting screw does not have an insulating washer, therefore can't be mounted in a metal case without rigging some sort of insulation. On the other hand, the plugs are totally unusable because the splined shafts are not splayed enough to fit tight in the socket. This can be manually corrected, but five splines per plug times 20 plugs is a lot of unnecessary work. The photos show the plugs as received (inner), and after splaying the splines out (outer). Also, the set screws for the plugs are too short and too loose to be usable. Bottom line: It's cheap junk like this that gives Chinese products in general an undeserved bad reputation.

O**N

great sets of connectors

These are great sets of connectors for audio, RF, and low-voltage electric, for projects.

C**K

Screws too short for 16ga or smaller wire

Not for 16ga or smaller wire. The screws aren't long enough. I used 16 ga speaker wire and the screws wouldn't hold them. Had to solder the wire ends so the screws would hold.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
$39.41

Duties & taxes incl.

USAstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

Hilitchi 40 Pcs Binding Posts Terminals 4mm Banana Plug Socket | Desertcart UNITED STATES