Legrand Wiremold Cordmate II 120 Inch 12 Piece Cord Cover Kit White | Cord Hider, On Wall, Self Adhesive, Hide up to 3 Cords, Cut to Size, Customizable, Cable Concealer

One of the best investments that I have made for my Home projector and screen. I am using it to hide my wire from the projector and the screen and I am amazed by the quality and usability. Definitely a no brainer and I would suggest everyone to pick one if they intend to do so or they are in for the market for a perfect wire hiding solution. Just one thing to make sure is be very careful when you stick it, because once you done its bit hard to take off without having issues with the paint. but if you try good you can take it off easily. I made a mistake of pulling it apart and my paint got peeled off. Its my mistake though. It sticks perfectly and no issues with coming off from wall and all. Make sure you use it in a smoooth finished area. its really easy to cut as well for your conveneince. I used a box cutter and its really easy for me. Even though its little on the pricier side I won't mind spending it because the end result is so good and satisfying. Definitely a recommend.

These were bought to hide my surround sound speaker wires across the living room. I purchased one kit before measuring the length in which I needed so of course I ended up being short. This Kit Includes: 4 - 30" CordMate II Cord Channels, 3 - C59 Couplings, 2 - C56 Flat Elbows, 1 - C57 Inside Elbow, 1 - C58 Outside Elbow, 1- C51 T-Fitting. This means you have 120" of cord cover. I used a saw to cut these to certain lengths and the plastic held up very well. It didn't split, break, bust or fray the ends to make it look unprofessional. With the addition to the couplings, elbows and fittings you can run these very professional looking with no cords poking or hanging out making your living room or other place areas of the house you have cords look like crap. This is a very nice alternative to tacks or coax cable clamps you nail to the wall. It's a more expensive alternative but the look you get with these really pays off because it reduces clutter. There seems to be plenty of room inside the cord channels and I was able to place two separate 18 gauge speaker wire into this without any issues. What many other comments fail to mention is the fact that these can be unsnapped from the side to allow you to add or remove cords more easily without having to run them from end to end. This was a nice bonus as I had already run the cords and had them hooked up prior to receiving these. They came white but are easily paintable to match any room / color you have and makes this is a nice addition to have with these. I will note that prior to applying the sticky side to the wall I use alcohol to wipe down the entire area I would be placing these to clear up any dirt or debris. This tends to be an issue when sticking anything to the wall and you should follow this step to ensure that it lasts for awhile. These can be used not only for speaker wire but ethernet cable, HDMI cable, coax cable, power cables and anything else you can slide into this. I would like to add that these do have limited space inside so you may not want to use these for every cord behind your TV / TV stand or computer desk. Once you do decide a place to use this and stick to a surface it adhesives very quickly and you only have a few seconds to decide if that's where you'd like it or not. I'd go ahead of time and make specific spots you want to place these to avoid any crooked placings. All in all a very nice product and so far so good!

The Wiremold CMK50 is a must for anyone wishing to clean up the wires from their electronics. It's standard white color and attachments allow this product to cover a number of wires providing a more professional and neat look for the homeowner. The adhesive affixed to the backside of the casing makes for easy placement on any wall. Pros: Easy to set up. Easy Snap casing. Easy to place on wall. It holds approximately 3 standard wires. Cons: Requires the user to cut panels in some instances. Adhesive became unstuck after a couple of weeks. However, a quick push back and it hasn't come loose since. It holds a max of 3 wires. Tips: Use a pencil to mark where you want to place casing to assure that the casings are level. It might help to use the level tool on your phone or purchase one. If you're cutting the casing to make it smaller, mark and measure the casing ahead of time. Overall: This product is a great tool for the person who wants their entertainment center to look neat and orderly and save a bit of money. It truly makes a huge difference in neatness and only took me about 10 minutes from start to finish. Another benefit is that it hid the cords from my child, meaning that the cords were out of site and out of mind, preventing a child from pulling the chords.

I bought a Benq W1070 projector way back and only until this Christmas break I was able to gather all the materials needed to mount it. Came across this well reviewed wire duct set and it was the best purchase yet. Made with quality material and very sturdy. If it was not for the thick AmazonBasic HDMI cable, I could of put more wires in the duct. I had only put two cables which is the power cord and the HDMI cable, I have a Promedia 2.1 speaker, I used a bluetooth streaming device to connect the audio to my laptop. The backing is very sticky (good and bad), it held the thick and heavy AmazonBasic HDMI cable quite well against the ceiling, the bad part is, I don't know if I will run into trouble when trying to remove this later on. I tried to paint the duct to match with the wall color and for some reason the paint does not want to stick, brush painted the ducts all over for three times before the installation and I think it still could have been better. Overall I think this is a good a solid product, it served its purpose very well! I highly recommend this product to people that wanted a clean look to their TV/AV/Projector applications without having to intrude/penatrate the wall.

As someone who is super organized and hates hanging wires, I have found one of the best wire management concealers out there. These are so convenient and easy to work with. Sure, you have cable ties, velcro straps, and wire management sleeves, but this will give you the best clean look for hiding wires (see photos). Practical and ease of use: I can't express how easy it is to simply remove the back tapping and attack it to your wall. The tape is very durable but be careful when removing. I feel like if you remove it too fast and hard, you may take paint with you! I used this to hide the wires coming down from my TV. Moreover, I used it for wires that would follow the molding in the room to hide as much wire as possible. I would say 2-3 would be the maximum amount of wires you can hide in the wire mold. I did not need to use the bridges to connect one wire mold to the other and did not do any kind of cutting as the size was worked perfectly on its own. Although it does not look too hard to cut. Besides, any cuts made can be concealed with the bridges anyway. Overall, I really like these and would continue to purchase them to hide any wires throughout the hours. At first I thought the price was high but after using it, it is well worth it!

First, this is a great item. It worked extremely well to hide the wires in my living room from the outlet to a wall mounted television. I was able to fit the power cord for the television, ethernet cable and coax into the channel. It was a fairly tight fit and was a little difficult to get the three cables to line up next to each other through the whole channel, around bends, etc but once complete it is a testament to its very thin profile. The cuts were easy to make and the adhesive is great. I don't think any of the channels will come off the wall. The angles, extensions, T and corner channels are not adhesive and snap to the long channels which are secured to the wall. The only gripe I have with this product is the quantity of each component you are given. After completing my project I have almost 3 full long pieces, the 3 extensions, inside and outside corners remaining. I used the one T and both angle channels for my project so if my next project isn't all straight around corners the extras are pretty much useless. It would have been great if they included an extra T and angle channel and removed one of the longer pieces so there wouldn't be so much waste. Overall a great product but I'm on the fence if I would purchase this same SKU again since I would have even more parts going to waste. It feels like the intent is to get you to buy more packages if you need the T and angles but I would definitely buy another if the quantities were more balanced.

These are a nice alternative to putting the wires in the walls. I used this set to hide the wires from the high front speakers. The speakers are 9' across from each other and 7' off the ground. I took the straight covers across to the middle of the wall for each speaker. Each side measured 45" for each speaker. Then a tri-connector was used to head both wires straight down the middle of the wall mounted TV. This set gave me enough to hide the wires about 3' down the wall. Counting the gap for the wall mount I need about 3' more to get to the floor. I have a second set arriving today to finish the wires down to the floor and then across the floorboard to the receiver using an L connector. I figure that will take about 1/2 of the second set. I painted them with two coats of matching enamel wall paint. They blend in nicely when painted. These come with plenty of connectors for just about any configuration. I have two 16 gauge wires running inside the middle channel. You would have a difficult time fitting much more in. They are low profile to the wall. About 1/2" thick. Perfect for two wires. Any thicker wires or cables will need a different model. They snap shut tightly with no chance of them popping open. As far as the adhesive. I have read reviews which claim that they do not stick to the walls. They must have some sticky, slippery walls. I used these on freshly painted walls. As soon as just a little part of the edge of the adhesive came near the wall it was like a magnet. Be careful and make sure the covers are where you want them. Once they are fully touching the wall they are staying there. I am impressed by the adhesive. I was totally expecting to have to glue them onto the wall.

Awesome! I finally got all my materials to mount my 50'' TV on the wall and build a custom glass L shaped shelf below it that wraps around a corner. This holding was the final touch and it worked out really well. I was able easily cut these to desired lengths, stick them onto the wall in various places and stuff a few power cables, audio cables and HDMI cables in them. Now my set up looks clean and professional. PROS: - Very good quality material that blends into the decor - Low profile (flat) design - Easy to cut to size - Snaps closed tightly - Very strong adhesive that once stuck on the wall, hard to pull off. CONS: - NONE. I cannot think of any at the time of this review.

eso sí, requieres una sierra para gestionar el tamaño de las canaletas.

Buen producto. El material es resistente, se puede cortar y cuenta con piezas para uniones y esquinas. Si es posible recomiendo fijarlo a la pared con clavos pequeños, al interior de la canaleta. Con el largo puede conectar TV, barra de sonido, internet y un appleTV, incluidos todos los cables de alimentación, internet, HDMI y cable óptico.

Item received in good condition. But MY GOD the packaging was so unnecessary. And on top of that the irony of “our boxes now use LESS MATERIAL” 🙄🙄🙄🙄

Too expensive for the quality

These were a breeze to install, and in my opinion, look great. It was between these cable keepers and doing some pretty deep explorative work through our drywall and behind the brick of our fireplace, so we chose this. As mentioned in other reviews the price is really steep for 4 plastic + adhesive pieces, but they did their job perfectly. An additional note is that we had a flat power bar cable and a very thick HDMI cable running through the channels and they just barely fit, so space is limited. The straight line measurements between my TV to the outlet are approx 12 feet.