Technical Parameters Max. binding thickness: 2" (about 500 sheets of 20 LB paper) Max. book size: 12.6" × 9.6" (315 x 240 mm) Milling Cutter: YES Temperature Controller: YES Adjustable height for working area: YES Built 4-in-1: Scorer/Creaser and Perforator and Paper Trimmer Binding up to 500 sheets How to Use 1.Press the handle and draw out the paper pressure. 2.Put the cover in-between the paper pressure and platform, and keep it close to the location. The platform could be raised so that the cover could be easily placed. 3.Put the paper in-between the cover and the pressure, piling it up neatly. 4.Push the paper pressure down against the paper and rotate the handle up, locking the paper in. 5.Press paddle down to"DN" position, so that a crease can be made on the bottom cover. And the push paddle back to "N" position. 6.Push the paddle to "UP" position, rotate the platform upwards and make sure the bottom side of files is flat. 7.Push the milling cutter back and forth on the back bottom side of files. 8.Gelatinize by moving glue box. 9.After gelatinizing, immediately draught the back cover slightly by left hand, press the paddle down to "N" by right hand, and then to "DN" position, sustaining for around 6--8 seconds. 10.Push the paper pressure down against the paper and rotate the handle up, turn the book to back face and put in again, sustain about 3seconds. 11.Press the handle down, draw the paper pressure open, and take out the made-book. Cut the untidy edges of the book neatly buy the paper cutter.
Trustpilot
1 day ago
4 days ago
