Sprinkler Wire Multiplier & Repair Device – Run Two Sprinkler Valves on One Wire – Fix Broken Irrigation Wires Without Digging – 24V Controller Compatible

This simple, ingenious device has saved me time and trouble over and over. It’s simple and quick to install; fits several if needed easily in every sprinkler timer I’ve ever worked with and is super durable. 15 years ago, one of my mom's sprinkler wires shorted out but fortunately we were able to duplicate the other good wire with one of these. Avoided digging a huge trench under two sidewalks 🏗️ and through roots of 30 massive trees 🌳🌳 – total nightmare saved! Wiresprout is STILL working perfectly today. 🤯 Grab these to save your sprinkler wiring – they're lifesavers! 🔥 Highly recommend! 🚀

This ingenious wiring pair worked perfectly for me and it probably saved me hundreds of dollars to have an irrigation company fix a broken zone. I used my wiresprout to bypass a station wire that had failed. Following the instructions included with the package, I installed one wire set into my Rachio controller to manage station 5 (brown) & 6 (yellow dead), and then installed the second wire set at station 5 and 6 so that the brown wire provided power, bypassing yellow. Anyway, I'm very pleased. The wiresprout pair are compact and easily placed inside the Rachio controller and the valve boxes. You will need to strip the ends of the wiresprout and provide your own silicone wire nuts to protect connections at the valve. The physical installation takes 10-15 mins.

The inventor of this little device is a genius! Super easy to use, quick to install, and best of all: saves you from having to install a new wire, which often involves trenching or burying a new wire over some significant distance. I was able to fix a zone that was over 200’ from the clock (controller) without digging anything. Didn’t need to find the severed wire, just “sprouted” off another zone using the existing intact wire. I’d give 6 stars if that was an option!

simple and amazing. I took me a whole ten minutes to install. I had a wire problem on one of the 2 valves, and it is about 300 ft from the controller. Digging and replacing wire wasn't an option for me. this wasn't a new problem. I had installed a device a few years ago that would split the time between the two valves. It started cutting the time short on one valve and I couldn't find a replacement . Maybe not making them anymore. I discovered this fix (wire sprout) on amazon. Delivered in two days and problem solved.

This product saved me alot of time and money. I had a zone in my backyard that had a 7 wire sprinkler cable running to it with all wires used (6 zones, 1 common) the wire for it was only receiving 19 volts, which was not enough to trigger the solenoid. Somewhere from the controller to the box, throughout the lawn the wire has become nicked or corroded over time and now losing voltage causing the zone to work. Estimate to run new wire was $500 at least. this product worked great. I was able to go to another box where I had two values, and connect both of those zones using the WireSprout to a single wire. I then used the other wire for the zone in the backyard which was still getting 25 volts to the backyard box. this way i was able to run the 3 zones on two wires, and did not have to run any additional wires and did not have to tear up my lawn and bury a new wire. This took 20 min at max to install and complete. I do recommend getting waterproof connectors to protect as well. All in all, it worked and all zones working as expected. Really happen thus far, and hope it continues to work going forward.

This product works and it is about half the price of the only other solution I found (Doubler). I had a non-working station 4 that proved to be a defect in the field wire for that station. The valve for that station worked manually, and the other diagnostic tests indicated a short in the field wire for that station. Wiresprout comes with two units, and each unit has 3 wires (one blue, and two green) that "sprout" from a roughly 1 inch by 1/4 inch brain. Wiresprout #1 is positioned in the valve box and #2 at the controller. A detailed explanation of the wiring at both sites is to be found in the attached jpg file. The text to the right of the wiring schematic is mine. The schematic and text with it come from Wiresprout. I found the website to be confusing and badly done and the only YouTube video to be also suboptimal. I hope my text clarifies how simple the installation of Wiresprout is. My install took less than ten minutes. I rated this 4 stars because of the company's deficient instructions and website.

Amazing that an amateur like me could easily attach this product and save the hundreds of dollars a contractor would charge! Highly recommend! Tiny enough to fit in the control box, too.

I highly recommend this product. I purchased two of them to add two new zones for my system. I included a picture of one of the zones. You can clearly see the existing valve and the new valve I added with a T connector along with the Wiresprout connecting the two valves. The wiring instructions and diagram provided are correct for adding a new valve to an existing valve that is working. Some of the reviews state the wiring diagram is not correct and that may be the case for a repair where there is a dead wire that is not working. Both my load and common wires were actually working so I had no issues. Lastly, the packaging advises to purchase a water proof connector (for the Wiresprout) that IS NOT included which will help extend the life of the Wiresprout connector. This is always needed for any electrical connections that are buried. I recommend the Dryconn Connector. Picture is attached where you can see I placed the Wiresprout in the Connector. You can get it online or at Home Depot.

this product is amazing. was able to add an extra line off my watering system. works on 2 stations right next to each other