Question 1

Can I attach this with a piece of wood on top and add my recliner on top of the wood. Or can I sandwich it between two pieced of wood and put recline.

Accepted Answer

I used 3/8 inch plywood above and below the bearing (sandwiched) and attached the top to the recliner base and it works fine on a heavy recliner.

Question 2

how do i attached it to 2 pieces of wood?

Accepted Answer

Let's consider that the Lazy Susan has a top and bottom.  I used the larger side as the bottom......it has the large holes.  Use those holes to drill that size hole through one piece of wood.  Now attach the Lazy Susan to "that" piece of wood using the small holes.  (The disc bottom has both large holes and small holes.  The top of the disc has only small holes.)  Now to attach the "top" of the Lazy Susan to the other piece of wood, use the large holes you drilled through the bottom wood to locate the small holes in the top of the disc.  Using a long screw driver (always drill pilot holes) and screws, attach the disc to the other piece of wood.  In doing a recliner, I attached a piece of wood to the metal frame of the chair and the other was a round piece of plywood to form the base or support for the chair.   I then found the center of the round plywood base, attached the bottom of the Lazy Susan to it (via small screws in the small holes) then drilled large hole through the plywood via the holes in the Lazy Susan, turned it over and using the large holes found the small ones in the "top" of the Lazy Susan and put in screws to hold the whole thing to the chair.  It worked like a charm.  And it will support a person and chair if that's what you are doing. RHF

Question 3

can this product be used with 20.5 inch square shelves that are 65 inches tall? Will it be stable?  1000 pounds is more than enough. thank you

Accepted Answer

As long as you fix the bottom to a base. It will not be stable enough on its own. Its also metal, so would mark your floor too without a board under.

Question 4

What is the size of the circular turntable?

Accepted Answer

15 inches was the size of the diameter. Too small for my purposes so I returned it, but it looked very durable and rotated smoothly.

VXB Brand 1000 lbs Capacity 12" Lazy Susan Bearing 5/16 Thick Turntable Bearings Made in USA 1000 lbs. max 15" inch to 30" inch Turntable Diameter Zinc Plated

Details

Details

Description

Specifications

Common Questions