EZ-Fluid 1/2" FIP Female Iron Pipe X 3/8"Comp X 3/8"Comp 1/4 Turn Double Handles Dual Outlet LF Brass Angle Stop Valve Water Shut Off Ball Valve For Water Pipes,Faucet,Toilet Valve,Icemaker,Filter(1)

Kitchen renovation. New fancy sink that you need an advanced degree in quantum physics to install. Had to change out the existing shut-off valve under the sink to add a new water line to the cold water filtration on the new sink. Works exactly as expected. Thought the connectors on opposite sides would be a problem, but actually works really well as long as your feed lines are long enough. Water works, no leaks, minimal amount of swearing, but that's moreso on me than anything with this shutoff.

Works fine

Very good quality and it works perfect. Make sure this is what you want. Because it's not a compression valve, it looks the same, but if it's what you want, it works perfect.

I needed another 3/8" comp outlet for a dishwasher, and replacing the single-outlet valve with this dual-outlet valve was the simple solution. I removed the old valve and cleaned the threads on the pipe from the wall, and then wrapped the threads with a quality PTFE tape and installed the new valve. Some reviewers noted the lack of flats for a wrench on the valve body (where it attaches to the outlet pipe from the wall). My solution was to remove the compression sleeve from one 3/8" valve outlet, and then re-install and fully seat the compression nut. Rotate that valve handle to its "closed" position to get it out of the way. Next, use a large enough adjustable wrench to seat against the top of the nut and rear of the respective valve. You'll be able to turn the valve easily rather than relying trying to grip the round valve body. It's a solid well made valve, and the quarter turn valves showed no signs of leaking.

Works great. For the life of me I can’t understand why anyone would still buy a multi turn valve instead!

I should have taken a picture of what was done prior from the old owner of my house. These are great to clean it all up. Both hot and cold had 1 “T”, 2, 1” nipples, 1, 90 and 2 gate valves with 2 fittings to the 3/8 compression fittings? WTF? What a mess it was! Now it’s clean!

Installed easily, shutoff valves work easily and do not leak. Note that there are no flats for a wrench. I used a rag to protect the chrome from the jaws of my pliers when installing. It's nice to have separate valves for the two water outlets -- some have a single valve with two outlets. If something goes wrong with the dishwasher (inlet valve or the like), I can shut it off without also losing hot water to the sink.

Great product for under a kitchen sink. The cabinet area under a sink can become cluttered with hoses, electric cords and disposers. This value is low profile and allows for a neat and orderly arrangement of the hoses for my faucet, dishwasher, and ice maker.

Je n’ai reçu qu’une valve sur le lot de 5