Base Primer Army Green, 400 mL Acrylic Spray Primer, Spray Paint Basecoat for Miniature Priming, Tabletop Roleplaying, Boardgames, and Wargames Miniature Modellin

Excellent coverage. Excellent adhesion. Be advised: it does lay the paint on thick if you get too close to the mini. $10 less than the citadel at time of purchase and honestly a better product. More satin than flat, I would say but still a deep rich black. I like the satin because it picks up highlights more, but if you're looking for a super flat flat, this is not the one.

I started painting minis by using paint on black primer for awhile. Eventually decided to try this and it's a way better option! Very important to shake it for a minute or so and spray out before using on minis. I spray from above and find the consistency of the primer coat is so much more even then when I did it by hand. It's easy to miss spots, so I'll check the mini from all angles before moving on. Good for dark characters and shadow layer in slapchop style.

I feared I'd spray my N scale models with blotches or whatever. That never happened, what happened were easy passes that resulted in a solid coat of primer without clogging any brick detailing Pros: - Very user friendly, even if you rarely ever use spraypaint (like me) - Relatively affordable - Excellent professional quality (even my cheap acrylics adhere to it just fine) - Sprays cleanly without feeling like you have to press down too hard (if you're doing short bursts on small objects, this matters a lot) Cons: - I really wish they'd add a rotating nozzle like newer spraycans have so we can decide how it sprays out Usage: - N Scale Train layouts using Resin prints, with ultra fine detailing - it does great

works well for priming miniature but if instructions are not followed properly it can create splotches and texture there were no leaks the color is a good white it is easy to apply to clean models and it looks fantastic when smoothly applied make sure prep everything as to get the best result and the paint is not easily removed from models

Works great, dries fairly quickly, and lasts for a good amount of minis. Sometimes struggles to get all the areas of the mini evenly but this is more of a skill issue on my end than on that of the pain. Sprays well, doesn't seem to leak. Smells strongly so I recommend you use it outside. My only real issue with it is that it feels a little overly pricey even for what I got, but I understand production systems play a part and beyond that have no real concerns.

I keep a supply of this on hand in my craft room for the shiny projects that I want to have a matte finish. There are items, like rub on transfers or paint, that have a glossy finish and this matte spray is phenomenal at covering the shine, but still keeping the colors. Spraying too close, though, causes a cloudy thickness but the proper distance from the project works perfectly. The smell is not the most pleasant so we spray in the direction of the wind, and with gloves on. Once it dries, the odor is gone.

Instructions say to insert flathead screwdriver at marked point and twist to break the seal. It then has a flathead screwdriver slot. I inserted the screwdriver in the slot and twisted but instead of opening the lid it punctured the can and primer began spraying uncontrollably all over the place. I covered it as best I could and ran out of the house throwing it into the yard. Our kitchen sink and counter were absolutely covered in this paint which is nearly impossible to remove. I still have it all over my hands after hours of scrubbing. This product goes way beyond being bad and is destructive!

My favorite mini primer. Goes on smooth, dries fast and has great adhesion. Been using this for years

Easy to use Great Matt black colour

Zum Grundieren von Miniaturen eignet sich diese Grundierung super. Sie lässt sich super einfach auftragen und deckt sofort. Sie fließt auch hervorragend in kleine Vertiefungen ohne diese dabei auszufüllen und die Struktur der Figur zu verdecken. Die im Anschluss aufgetragenen Farben halten sehr gut. Man sieht die Grundierung auch nicht durch, egal ob nach der Grundierung mit dunklen oder hellen Farben gearbeitet wird. Die Grundierung mit dem Spray spart im vergleich zum Pinsel enorm viel Zeit. Ich habe die Grundierung bislang nur auf Kunststoff verwendet zu anderen Materialien kann ich keine Aussage treffen.

Stavo cercando un buon prodotto per rifinire i modelli che stampo in 3D e coloro e sono incappato in questo. Il prezzo non e' proprio economico ma neanche oltre la media dei prodotti decenti. E devo dire che questo non e' decente, ma e' superbo. Con letteralmente due leggerissime passate a distanza di 15 minuti l'un l'altra il modello e' venuto benissimo senza alcuna sbavatura. E ne ho usato davvero poco. Mi serviva come finitura per un busto appena dipinto (come primo oggetto su cui testarlo) per dargli un po' di protezione contro i vari agenti atmosferici quali umidita' e freddo, o il molto caldo d'estate (anche se ovviamente lo tengo dentro casa) Il risultato ripeto e' perfetto. Al tatto e' leggermente ruvido ma si sente che c'e' uno strato a protezione dei colori e da anche quell'effetto satinato che mi piace un sacco. Per tutti quelli che stampano 3D e cercano una finitura superba con 2 spruzzate senza spendere un patrimonio... Beh, siete nella giusta pagina.

I bought The Army Painter Color Primer in White to prep a black metal piece, and the results are fantastic. The coverage is impressive—it managed to mask the original black surface perfectly. What I loved most was how quickly it dried; it was touch-dry in just a few minutes, which really sped up my project. The finish is smooth and creates the perfect base for the final coat of paint. Highly recommended for anyone looking for a professional-grade primer

Compro cualquier clase de imprimación oscilando entre 4-8 euros, de buena calidad. El precio me parece levemente exagerado, pero el producto es bastante bueno.