Flash Furniture Mobile Sit-To-Stand Laptop Desk, Black

I already had one of these exact tables (purchased elsewhere) and just got this one from Amazon. It's very easy to assemble, just four screws with the included wrench. (Handy hint, put the height lever toward the back. That way it doesn't stick out the front and is still very easy to use.)The table rolls easily and the height adjustment lets you put it right where you need it. It also pivots very smoothly so that might not be for you but I love it. It's perfect for a laptop or even a sofa-side table for essentials.I got it in black. It's very nice looking. The adjustable part of the post is silver but it doesn't stand out, particularly if the table is not in a high position.You do have to push pretty hard on the center of the table to lower it. So you want to set the height before setting a laptop on it.My only complaint about this: There were some white flecks on the table top. I don't know what they could have been but a fingernail took care of them easily.

Easy to assemble. 10min. After assembly, Need to push down pretty hard to get the table top to go down. The cylinder pole has a clear light grease on it for easy sliding so try not to touch it. Wash hands if you touch it. Rolls well. Sturdy. The casters were hard to press in so I used a hammer and wrapped the hammer head part in a thick towel and banged the casters in. If you don’t wrap the hammer head you could crack the casters. I bought the black color. Looks sleek. I use for laptop, lunch, dinner, I roll it around the house when I need to transport something heavy. Multi use. Love it!

When I opened the box, I was missing all of the screws. That was a disappointment. But I went to a local hardware store and bought screws for $1.50. other than that, assembly was easy. I am surprised at how much I love this little table. I'm an interior designer so I'm pretty picky about how things look. The Walnut matches other Walnut finished furniture in my living room. The stand is bulky and doesn't look real nice. But it's sturdy so...It's super convenient and moves around easily with the casters. You can push it to the side when not in use. Its not easy to adjust up & down. It does take a lot of pressure to push from a standing to sitting position. You have to put all your weight on it. So someone who is frail could probably not do it.But overall this is my favorite purchase of the year!

Very nice little table! I actually purchased it to serve as my computer keyboard and mouse table which is very handy when you play and record on your large piano/keyboard and need more flexible arrangement for your mouse and computer keyboard because of the constant moving around the equipment etc. This is a perfect size table that doesn't take up a lot of space and it's strong enough. I wouldn't place my coffee mug on it while having the mouse and the computer keyboard even though, there's enough space for all three. It's a little unstable for too many things, but perfect for the intended use and very mobile and functional. Check the photos I posted of my arrangement of this little nifty table. I have no idea how functional it would be for a laptop but it looks perfect for my iPad-2 (with or without keyboard) and a coffee mug). Two thumbs up!

Super easy to put together. The casters and spin function allow it to move easily. It is a little hard to push it back down into a "sitting desk" height as other reviewers have mentioned.My biggest problem is the height of the desk. Sitting, it is a smidge too high to be really comfortable, and standing I need to pile at least 7 inches of books on it to make it high enough to actually work. I am not a giant, I am only 5'7" but it is way, way too low to call it a true standing desk.

Perfect for sitting in your recliner or on the couch! I loveMine!

I love that I can now move around with my laptop. Working from home has presented many challenges, including being stuck in front of a computer in the same room at all times, especially as I like to be connected via ethernet and not just wifi (for speed and dependability). This desk has allowed me to move around my office and stand up if I want. I have found the raising and lowering to be a bit difficult, but have sprayed a bit of WD40 on the rod and that has helped a little. It also does not take up a tremendous amount of space and, if it does, you can roll it out of the way! I would recommend this desk to anyone who wants to change up their laptop "zone!"

Pros: Lightweight, rolls easily, relatively small footprint. It's a replacement for a larger more cumbersome one. Unlike some others report, mine is pretty sturdy. Holds my MacBook Pro and iPad Pro well, even side by side. Cheap price. Pneumatic cylinder works well although you have to lean on the table to make it go down, not a big deal. Pneumatic cylinders are supposed to have some resistance, wouldn't want it to go up and down too easily, We'll see how long it lasts, have only had it for a day.Cons: Before I describe my assembly struggle let me say I'm a motorcycle mechanic, not a stranger to parts assembly and use of tools. Assembly instructions are less than stellar. Here's why: On my instruction sheet the picture of the top support shows a square base on which sits a round piece on which sits a square bracket. The picture shows the cylinder end going into that square bracket. Mine has no square bracket. The instructions also say that one must remove the plastic cap from the end of the cylinder that goes into the bracket. Mine has a small white plastic "cap"(?) Gentle tugging with pliers would not dislodge that cap. So I called Flash Furniture. I think they're in GA (770-721-8391). Fortunately the woman who answered was English speaking. I swear she announced her name was "Vicky". I also swear that in the background I heard another woman announce herself as "Vicky". How many "Vicky"s do they have there?? I explained that I purchased the product from Amazon and provided the order #. After not being able to find the order # in their system she said I must have purchased it from Amazon. Really? When I asked whether anyone there was familiar with this product she answered haughtily that they're a distributor and they sell thousands of products. But she'll try to help. So I explained that the square bracket shown on the instruction sheet is MIA. She explained as if to a toddler that sometimes the pictures are only an approximation. Hmm, but somehow the cylinder end has nothing to attach to. If I just push it in the lever pops it off. Perhaps it's because I can't remove the plastic "cap". The plastic cap absolutely has to come off; you have to pull on it pretty hard. So much for not knowing anything about your products. Well, she replied, that's just true of all cylinders. So now this woman who has no knowledge of the thousands of products they sell is a cylinder expert. While talking with her I tugged and tugged with increasing force but if that plastic piece is supposed to come off I'm a frog. By now she was barely hiding her attitude behind her southern drawl. She finally said she would send me a replacement top support. What's my name and address? I started to give it at a normal rate of speech but heard, ma'am, ma'am! MA'AM! I HAVE TO WRITE THIS DOWN SO YOU HAVE TO SLOW DOWN! No problem. What about the cylinder on which I have now damaged that plastic piece that she insisted I must pull off? She's sending a new cylinder too. In the end that's decent customer support but I could have done without the attitude.

As advertised, functional, stable enough and compact

llego bien, sin daños, es de buena calidad

Comprado de segunda mano con un estado de "muy bueno" y me lo envían con el pistón de gas defectuoso e inoperativo. Producto devuelto.

All in one in a very reasonable price.Cool, simple, practical and cheap !

Ich habe lange gesucht, um einen formschönen Stehtisch zu finden. Dieser Tisch sieht (auch aufgebaut) gut aus, die Stabilität ist ok, aber....leider funktioniert die Hydraulik nicht!Ich habe den Tisch aufgebaut, die Teleskopstange eingebaut, auf Stehhöhe eingestellt, und jetzt kann ich ihn aber nicht wieder tiefer stellen, obwohl es eigentlich verschiedene Höhen geben sollte. Das ist für mich ok, aber eigentlich eine Fehlproduktion. Ich kann ihn also nicht nutzen, wenn ich ihn z.B. vor das Sofa stellen wollte.