Clockwork Synergy - 2 Piece Heavy NATO PVD Black Nylon Band

Fits on my Garmin Fenix 3 HR well.Regarding Fit:It's much more comfortable than the stock strap & low profile. Since I've got some decent dial calipers right here, the strap measures 26mm wide (as ordered) and is 1.4mm thick. I've only been wearing this a few days now, but it's conforming to my wrist well, but still feels a bit stiff.I have large wrists at ~8.6" and this just fits me. For a tighter fit, the next to last hole, otherwise the last hole on my left wrist. Fits tight on the last hole on my right, but with a large watch like the Fenix, I don't wear on my dominant hand (right) much. I know I may be wierd, but I switch wrists sometimes. I wish the buckle portion were longer, as they way it fits the buckle is pretty far to the outer edge.Also, you'll need 2 small torx (T6?) screwdrivers to switch the straps on Garmin sports watches (at least the fenix 3 & vivoactive).Props to Clockwork for answering my query regarding strap length promptly & for sending a discount coupon code in the nice box the strap arrived in.Regarding Finish:The good- overall pretty good, the nylon is stiff starting out. I like the black PVD coating on the hardware, has taken a few hits w/o scratch.A couple of nit picks-As noted by others, the nylon may require a bit of sanding or careful touchup w/ a hot knife/soldering iron for sharp melted edges. I had to do this on 1 spot underneath where it was sown. I didn't have any issue with the melted holes being sharp. A couple of the stitches on the pin end were slightly off, so it took a bit of work to get the large diameter Garmin pin through. One of the hot knife cuts isn't exactly perpendicular on the buckle half, but since you don't see it when wearing it, no biggie.Overall an awesome value & if it were a bit bigger (or at least the buckle side longer) I'd buy another 1 or 2 to mix up the colors. My next step will be to make a paracord strap for it, like I did for my Solar Casio after the strap broke.

Several months ago I bought this band in olive green for my Apple Watch at a local store since it was on sale. I'm sort of a watchband fashionista and I have also gotten other bands in the meantime. I always keep coming back to the fabric band due to its comfort and good looks. I saw the khaki color here so decided to get it. I think Clockwork Synergy has Apple bands too but since I already had a spare watchband adapter, the plain 20mm would be fine.When it arrived today I was a little surprised at the color. It was more of a light olive green rather than khaki. I'm not disappointed at all since it is a very nice shade I was just thinking it would be more of a tan/light brown color.As my original was, the fabric was just a little stiff out of the box being that the band is new. I twisted it here and there and it began to soften up. Length is good too. I have a small wrist, about 6 inches circumference and buckle it on the 3rd to the last hole for the Apple Watch. Looks like if you have a really big wrist, like 8 inches circumference it would still be good.Nice band, I may even get another color.

After trying various replacement bands for my Pebble watch with no luck, this is the one that WORKED. The other bands I had purchased are a full circle. The pins were meant to hold the face to the band - like the band was woven over the pins and under the watch and over the other pin. That. Did. Not. Work. The pins kept popping off. I was lucky enough to find them every time! THAT is NOT a problem with this watchband!! See, here's the thing with me... The silicone band that comes with a Pebble makes my skin sweat underneath. So, I wanted a fabric band that would be more likely to breathe. The other fabric bands seemed great in theory. But, in reality, having to search for watch pins every day is more than a nuisance. It's full-on annoying. This watch band fits my Pebble perfectly at 22mm in width is sturdy enough that it doesn't seem like the fabric will rip or fade. The stitching is very secure and strong and seems as it it will withstand the long haul. And, most of all, it BREATHES! THIS is EXACTLY what I was looking for. Thank you, Clockwork Synergy!

My initial review would have probably been lower due to it having rough edges on the inside of the band from where they fused the ends to prevent fraying. I came close to sending it back because it was painful to wear. I ended up using a sharp knife and fingernail clipper to carefully trim the sharp edges off and now it is perfectly comfortable. I replaced the leather band on my Samsung Gear S2 Classic watch with this one so that it can get wet.Pros:-weather resistant-sporty looks-very comfortable-lot of holes for fine adjustmentCons:-needs modifications to be wearable-I wish it had provisions for the pins with the knob on the side of them for tool-less removal-would have been nice to have included some new pins.-the black paint on the rings does scratch, but it doesn't seem to chip off and the scratches do add a bit of character.

I decided on this for my Timex Expedition to replace the factory leather band. I thought the one piece version a bit too clunky and went with the 2-piece version. I found that the stitched seams were a bit chafing on my wrist where they had been melted to prevent fraying. So I used a sharp pair of scissors to cut the melted edges off in places. It's now comfortable.I also bought the same band in gray but found that the OD version was an inch or two longer for some reason. I had to cut to cut the end to size it smaller. I am deducting a star for all the adjustments I had to make...but for the price this is to be expected on such a 'universal' band so don't see it as a negative.