Outdoor Spar Gloss Urethane | Water-Based, Exterior Wood Protection, UV & Weather Resistance, Moisture Resistant Finish, Quart

Easy stuff to use. No stickyness. I was able to cover the deck twice. I painted the deck because it had never been painted or treated so the wood was so ugly and porous. Old decks over at least 10 years have to be painted solid, not transparent because the deck was in a bad weathered condition because, it had never been sealed or treated. So with deck paint and urethane it looks a lot better. It does not yellow great value for the money and very easy to use. I used a roller. Great and would definitely order it again.

i used this product to put clear coats on maple window sills that replaced old, warped white pine sills in my home. I did about 4 coats with a spray gun and the results were fantastic. It dries very fast and forms a waterproof, UV protected finish on the wood that looks like skim milk when first applied but quickly turns into a crystal clear coat. On of the best features of this product is the quick and easy cleanup. A bit of soap and water and a quick rinse with warm tap water and you're done--no solvents or lacquer thinner needed. 5 st*****s! I'm adding photos of before and after. very happy with the results.

Excellent product. Didn’t have time use as much as I thought I would. Spreads real well. Looks great!

Ehh. I wouldn't buy it again. Doesn't gloss shine nearly as well as I hoped. Doesn't work on metal. Works good on wood and plastics.

I have some red cedar Amish chairs and table I bought a couple of years ago and they definitely lost their beautiful gloss they had when we first bought them. I did prime them about a year after purchase that was supposed to be a gloss combo, but it really lacked luster. This made the chairs shiny and glossy again, very easy to use and quick to dry. Definitely recommend

I've used this on several RC airplanes and it works great! It's a nice light-weight solution for waterproofing and adds a little depth and considerable gloss to my planes. I used it on foamy E-Flite planes like the Turbo Timber and the decals pop nicer now. My Clipped Wing Cub also looks glossy and this protects the fragile paint well. Cleanup is easy since it's water-based. One note for builders would be not to coat any foam that touches other foam; this coating has a decent amount of friction with itself, so joints make noise if they're both coated and rub together. I don't have any issues with it sticking to itself, but I got some inside the flap/wing interface area and it makes scrubbing noises sometimes.

Made a pallet table and used this to gloss coat it for outside. I need to do more coats still for more shine but so far it gives the wood a nice vibrant look and brings out the natural colors of the wood tones. It's not thick either so no clumpy mess and applies smooth with a good brush. Dries quick.

Very easy to apply and looks great. Works really well on eastern red cedar because it keeps the natural wood grain without turning it dark like oil based versions do.

I did not get the product that is shown