Superclear Table Top Epoxy Resin 2 Gallon Cup Kit, Crystal Clear 1:1 Protective Coating for Tabletops, Bar Tops, Countertops, Anti-Yellowing UV Resistant, Food Safe, Made in the USA

Mixes well and sets up relatively quick. Good clarity when cured too. Good stuff!

I used this product to coat 5 deep shelves. I was looking for a resilient surface which resists damage and has no bubbles or wrinkles. In every respect this product was a success. Does not dry so quickly you cannot work it; also worked really well in terms of being self-leveling. Bubbles are easily removed by heat gun or hair dryer - literally zero bubbles after using the whole 2 gallons. I used epoxy pigment to color the product without any issues (used several different makes) so I can attest this coating is easy to dye and can achieve an even color without any special effort. The cured product has no smell or odors attached and the sheen finish is excellent. Not recommended for deep casting, but for wood surfaces this is proving to be a great product.

Easy to use and laid down flat. Price was awesome, and came out beautifully!!

Okay so all in all I would definitely recommend this product. I think it’s beginner friendly, not a bad smell (I still did it outdoors though), and it is crystal clear. I decided to try this product off of a leap of faith, I just saw it and I thought I might try this epoxy. Firstly I like that it is not overly thick, but it is a little bit on the runny side, but I prefer it to be more thin and easy to spread out than to be too thick. Secondly, it mixes with latex paint for color additives well, keeping in mind you don’t want to add more than appx. 1/16 of latex paint to your epoxy - so make sure you do a good base priming and painting coat! Thirdly, I like that this product is crystal clear with white colors and as a clear coat over white colors. The first two pictures with the blue sinks, I used this product to make the base color coat as well as using it for the clear sealant coat and you can see for yourself, it’s bright white. I also used it to attempt a DIY shower renovation, which I followed the technique I saw on YouTube, and the product cured so beautifully. Unfortunately I sealed it with another product( the very last picture) because I was running out of time and that product offered prime shipping but it was not nearly as clear as this one. I am giving it 4 stars because I’ve only ordered one batch, so when I do order again, I will be able to update and speak on the consistency in quality of the batches. I did not experience any issues with the ratio, the curing time, and the working time was well over 30 minutes. I didn’t have excessive bubbles. I do have both a blow dryer I use for epoxy crafts and a torch but a simple blow dryer was way more than sufficient. I am just an average DIYer, this was just a project I saw and wanted to try out and as this is my guest bathroom, I don’t really care for the suggestions that I should’ve used tile etc, it’s what I wanted to try. I will say this has held up wonderfully, I made sure to waterproof every surface I could and silicone everywhere that I could think of. I am exceptionally pleased with this product!

I make small things like jewelry, keychains and pens out of resin to sell and wanted enough supply not to be running out every week. This is a great price for 2 full gallons of resin. What I like is it mixes easy, cures under 6 hours for small molds, is crystal clear, a good enough quantity for lots of small projects and a few experimental large projects. What I do not like is all the bubbles even after slowly mixing, waiting and using heat. Clear pieces come out with lots of tiny bubbles. This stuff gets hot when it cures and setting time is around 30 minutes or so. I haven't timed it but it's quick. Now for beginners to resin that have not used THIS particular brand before and have used the resins that don't cure as fast, don't get hot or smoke and have virtually minimal odor... Pay attention, please! This resin once mixed cures fast within 30 or so minutes, so work fast and set up before mixing. Use in a WELL ventilated area or outside if you can. The fumes are no joke. Even in a room with windows open and a fan on the fumes are very strong. Use silicone or molds safe for resin because this stuff once mixed and in the process of hardening gets pretty hot. The silicone molds I use get so hot I can feel the warmth thru my gloves. Next big tip. Wear gloves. Cover your work table because mixed resin hardens and unmixed is a kind of sticky you do not want everywhere. Prepare your molds before you mix. If you paint your molds, get your mixing cups and tools ready... Once you mix the timer starts. I mixed and left my container sitting so I could prepare molds and within a few minutes the resin was already hardening to the point I couldn't pour any of it. Final notes.. Value for money, good quality for the price, ships fast, the mixing containers are great to have, hardens faster than most resins, crystal clear when hardened, easy to mix. I'd recommend.

Superclear is the best - I have used the deep-pour and tabletop epoxies for years now. The tabletop is very hard and polishes nicely. Like all epoxies, cure time will vary with depth and quantity of epoxy used, so make sure to do some test pours or ask for advice. The deep pour is excellent for releasing bubbles, but the tabletop needs more attention. Keep bubbles to a minimum while mixing or use a vacuum chamber - but be quick, a tub of mixed tabletop epoxy can flash-cure if you wait too long. For thin pours, a torch will clear larger bubbles, its the tiny bubbles (size of sand or dust) that are a problem - simply mix carefully to avoid these and your all good!

Been using this product for a long time. Quality item.

I have begun to use resin over the past few years to experiment with my fine artwork, both as a sealant and more recently to mold and sculpt with. I've tried a few different brands, but THIS one is the BEST I've found, and compares very favorably to a few other brands marketed for artists which are more expensive and in less quantity. Clear almost like glass. I've used for pours less than an inch thick, but seems to be great for thin or thick projects. Plays well with mica powders, ink, acrylic paint and in-bedded objects. I really appreciate that one part is tinted a light blue so you always know what part is what in which cup and can really see if it is mixed thoroughly. One thing I've noted is that it takes a lot longer to "dry" or become non-tacky than stated on the label, but not longer than other resins and I use that to my advantage as it is malleable before it becomes too stiff and brittle to work with shaping. Also of note: during the Covid 19 shut down, this company was able get the product delivered quickly and I was able fend off the isolation of "cabin fever" by using my lock down time in creative pursuits. Boo Lynn Walsh