maXpeedingrods Rear Control Arms Upper Lower for Nissan Pathfinder, for Infiniti QX4 1997-2004 Trailing Arms Suspension 905-802 905-803 905-804 K660903

Worked and fit exactly as needed. Production eliminated the “death sway/wobble” these are known for. Nissan pathfinder/inifniti qx4. Had to do one side at a time and rachet strap axle to align bolts-this is normal. Had a horrible wobble at 50 mphs when hitting any slight bump from the axle shifting due to bad bushings. 100% better after replacing. Highly recommend this seller and product, great pricing, fast shipping, perfect fit and overall great experience with this product

Good quality. Used ratcheting straps to pull axle to align bolt holes. Mounting points to attach existing cables don't match up so I just zap strapped them to the Trailing control arm. The rubber on the Old control arms had disintegrated and had caused a death wobble which these new control arms fixed.

Worked perfectly much better bushing than the stock parts

I'm very satisfied with these on my 2003 Pathfinder. They stiffened the rear suspension right up.

For my 2003 Nissan Pathfinder. Both lower and upper control arms fit, but the tabs that hold the parking break cable and ABS wire are not in the same location as the factory control arms. I end up using some zip ties, I'll have to see how that holds up.

Worked great

Saved a lot of money( but don’t expect it to last long) when I purchased them from the dealership and they didn’t last long ( I wasn’t going to spend it again) I don’t drive much and it totally worked to get rid of the death shake which I got from dealership parts after 3 years. Expect 2 years apoximatly my mechanic said. Also he put them on for $100 can’t beat that baby! Unless you have access to a lift.

Best dollars spent on my 01 r50 in long time. yeah a bracket doesn't hold a rubber grommet for the abs or something but who cares. Huge upgrade in rubbers and they look great. 10/10. I have a '96 r50 that needs this too and im hoping they give me 10% off after this review becacuse im buying it again. Oh, it is professionally wrapped when shipped unlike places like rockauto and stuff. so nice to see

I really liked the bushing, these bushings can rotate 360 degrees, which means you don't have to fasten the control arm at ride height. One major downside is, the ABS and parking brake brackets on both sides are welded 1.5-2 inches too far back. A few special zip ties was good enough to solve that problem. Will monitor product for longevity. Definitely solved some wander issues. Acceleration pulling left, and decel pulling right.

He instalado estas barras de control traseras en una Pathfinder 2000 y el vehiculo quedó como nuevo, recuperé el control y estabilidad mejor que con las originales NISSAN, ya que la ingeniería de diseño en los bujes es para manejo off-road, lo que en pavimento le confiere una suavidad extraordinaria, no duden en comprara este paquete de barras.