POWERWORKS Tow Towing Trailer Hitch Receiver Black Fit for Land Range Rover

Great product

Item was delivered on time it had all parts needed to assemble. It was exactly the item described on line.

the hitch was not squared up so did not sit flat against the mount. bolt were too short and no flat washers were supplied. While torqueng the bolts down to safely secure the unit to truck one stripped out before reaching specified torque setting. I will now not put this onto my vehicle due to quality and the fear of failure while towing.

I read the other reviews on here prior to ordering and was concerned that this product would be cheap, or flimsy or unsuitable. It isn't It is very robust, much more so than I hoped. It is all pretty much 1/4" thick formed and welded steel plate. This is a much better option than the stock Land Rover trailer hitch that it replaces. I have a large full size spare that was blocked by the stock trailer hitch. This design does not block removal of the spare. and the spare can be lowered with this hitch in place. Now, two complaints; 1.) the bolts provided are too small in diameter. Two of the mounting bolts should be 3/4" not the 5/8" supplied and the other that goes in the rear mount should be 5/8". I will be changing out all three when I get a chance. 2.) the coating on the steel is kind of thick for corrosion protection (which is good), but they also coated the inside of the hitch receiver effectively narrowing the 2" clearance. I couldn't easily fit my ball mount into the receiver and had to grind it down ever so slightly. Other than these two minor complaints I am very happy with the product especially at the price.

First of all after the install which wasnt that difficult, the 2" reese hitch would not fit in the square hole. I had to shave the inside lips down with a file. After I got that to work, the only thing I put on the hitch was a hitch carrier to put a large ice chest on the back when we go camping (so I could see it while driving). Well I bought a dirt dirt bike and an aluminum hitch bike carrier. When I was driving home I could see the bike bouncing up and down when I was on the freeway. When I got home I unloaded the bike and stood on the carrier and bounced up and sown on it and the entire hitch flex's a lot. Im only 200lbs. Now I plan on buying a travel trailer and I am replacing this with a Curt full mount hitch. I would not trust this for anything heavy at all.

Works absolutely great!

Item works as described however there’sa slight wobble.

Before installation ensure you have a reliable torque wrench. Center bolt - 65 Ft lbs. the 2 "Outside bolts require 100 - 110 Ft pounds. There are several videos online demonstrating installation. Dropping the spare tire is highly recommended for easier access to install the "center bolt". NOTE: This has a 2" receiver so if your hitch is smaller you'll need to install/utilize a "sleeve". Bonus: This part is a fraction of the cost of the OEM receiver.

Land Rover stopped making the receiver therefore had to find a substitute after-market product.

Doesn’t come close to fitting the Range Rover Sport. I ordered the correct component, but it has not been manufactured correctly. Don’t waste your money.

If there was an option for zero I would choose it. The issue was that the welding of the hitch I received was made with a deviation which made the bicycle carrier to stay sideways. Unfortunately there was no way to fix the problem. I do not recommend to buy.

This piece is a garbage! The bolts are made of garbage. It damaged my car. Look my picture after one tow under 3,000 pounds in the first trip. Now I have to spend more money fixing my car. What disappointment purchase!!! Please be aware of this product.