Yinfente Guitar Neck 22 fret 24.75 inch Electric Guitar Rosewood Guitar Fretboard Binding Headstock Block Inlay

The neck is made with good quality wood and feels smooth to the touch. The truss rod works well and allows the neck to be adjusted so that the neck is straight. My only complaint would be that the nut seems to be made of cheap white plastic, but it can be replaced with a higher quality nut if desired. The binding is flush against the wood. The inlays all look decently realistic. Would buy again.

For a relatively inexpensive neck, this is a very good neck. It arrived perfectly straight. The scale is accurate. The fret edges are properly beveled (though a couple need to be recrowned), the frets are solidly seated, and the fretboard does not contain any dents or chipouts. The fretboard binding is done very well. The headstock binding is also done quite well, and is flush with the face of the headstock. There are no gaps or bubbles in any of the binding anywhere on the neck. The inlays do not have noticeable filler around them and look good. The tuning holes are drilled straight, and they are properly spaced/aligned. The scarf joint where the headstock joins the rest of the neck is near invisible. All that's required is some very minor fret crowning in a few places and some minor fret leveling. I definitely recommend this neck if you aren't building your own.

Neck is straight as an arrow and matches listed dimensions perfect. Very happy with the quality and build on this! It is the closest replacement I could find to replace the broken neck on my Stagg. Super stoked with how it's turned out! Also, shipping was around 30-40 days but it shipped from Kentucky and was on my doorstep in 3 days!

This guitar neck isn't packaged very well, there's not enough padding to prevent the neck from breaking during normal shipping. The first one I ordered had been damaged in shipping so I ordered a replacement. The broken neck is pictured with this review. The replacement neck had improperly located bushing holes for the tuners. It would require gluing new plugs in and redrilling the holes with a press I do not have. The attached picture shows the problem with the replacement neck, with a straight edge along the back of the exceptionally tall nut for reference. On top of those issues, the fretboard is so light in shade of color that I suspect it may not be Rosewood. I know Rosewood will have some color variation but this one is so blonde that I wouldn't have ordered it. Doesn't match the representational photos at all.

A perfect neck for my project guitar, beautiful finish and shape, it needs oiling and a final finish which is also excellent for me, highly recommend a great seller.

At first glance, its nice - materials are fine, about what you'd expect. The plastic nut is REALLY tall, and the neck is baseball bat thick but whatever. I can work with that. There are 2 unforgivable issues that make this neck unusable. First, the fret spacing is wrong. 5th fret is at least an 1/8th of an inch off, so if you plan on playing anything higher on the neck, it's now not in tune. open E and 7th fret on A string is WAY out of tune when all strings are tuned standard using a tuner. Second issue - the the truss rod slid out when installing it which makes me think it was never properly attached in the first place.

It’s well made, clean, looks very nice. However, it’s 3/8” short at the center of the twelfth fret. So I’ll have some extra work to do in my very limited real estate on my cheap plywood “Kramer” V. Especially with a Floyd on it.

Well packaged, neck is pretty straight, nice wood. Inlays have a lot of filler around them, but are smooth. Frets are sharp and need some work, as expected. Binding on the headstock had some flaws. All workable, or cosmetic. The big issue is the holes drilled for the tuners. The 3 on the left look to have been drilled twice, once properly, and once at an angle, leaving enlarged oval shaped holes. I will be returning this. If the tuner holes were better, I would have kept it, though.

OK then, first impressions are pretty good, one piece neck nicely sanded needs oil finish. Frets are situated nicely and just a couple need filing edged. Inlays are fine and edging very nice. Well I’m fairly impressed. Just a bit of work and I’m sure it’ll stand up to good playing feel. Oh and packaged well with swift delivery. Give it a go, hope yours is just as good!🙂

Extrêment déçu pour le Body, manque d'épaisseur 413mm. mais le Fretboard est bon sauf bridge trop épais, (to big) Graphtech Tusq Nut 1 11/16 » Fente Martin L/H PQ-M600-L0, Épaisseur: 7/32 » (5.79 mm); Longueur: 1-23/32 » (43.41 mm) Hauteur: 3/8 » (9.17 mm); Première à dernière corde: 1-3/8 » (35 mm) devrait être plus petit.

tout est Ok!

Absolument génial, très content de ce produit !