Monitor Arm for 22-35 inch Screen Monitor Stand Height Adjustable Monitor Mount Bracket Full Motion Gas Spring VESA 75/100mm Weight 12KG White

MOVEMENT I have tried out a few monitor arms before and this one was by far the smoothest I have used. The swivel action is so easy and there is zero stiffness in moving the monitor around. The tilting of the screen angle is the only stiff part but I almost never tilt the screen so this was not a problem for me at all. It's very sturdy. AESTHETICS I purchased the white version, and the finish is better than could ask for, it matches my EIZO monitor perfectly - matt metal finish and looks very neat on the desk. While I would've preferred an all white arm, the grey / black accents actually blend in well with the overall look. The stickers on the arm could be easily removed leaving no residue too. SIZE The size of this monitor arm may have been a bit too big for my 23' monitor, when folded all the way back, you can see the joint exposed which may not be the best look but I don't mind it personally, if you have a bigger monitor it will definitely hide it. The length of the arm is also longer than one I has previously, so I don't have my cables threaded through the entire thing as they were not long enough (you can't see them anyway :) ) ASSEMBLY Piece of cake - took me 15 mins.

This stand is as solid as can be. I've been using it on the daily with a 35" ultrawide monitor and I've been switching positions every single day. The mechanism is as smooth as day 1 and I can change the position using 1 finger. I've only adjusted the tension twice - once when installing it and once after moving house. It has never creaked, whined, buckled or sagged. Don't cheap out and put your 300 pound monitor on a 15 pound mount, spend the little extra and never think about it again! One of the best products I've bought, 5/5.

I'm very pleased with this monitor arm for the price, which I use with a 34 inch screen. It is easy to assemble and easy and very flexible to position the screen. It has also freed up a lot of desk space. I had to make a few adjustments to get the screen square, but this is easy to do with the supplied tool. The downside is the cable tidy on the bottom part of the arm is too flimsy to hold cables and won't stay on. The manufacturer could improve this by making it the same as the cable tidy on the top part.

Don't be fooled by the copycat "New Balance" type branding (that italic NB logo is virtually identical, accident my backside) this company is Chinese all the way. But wait!, that doesn't mean you should run for the hills. Those gross stickers peel off and reveal a product underneath that is sturdy as hell! For around forty five quid you are getting a solid arm that can easily handle a large 32 inch or even 34 inch ultrawide monitor. My 32" BenQ is around 7kg and sits exactly where I put it, no drift or sag. I have a second one that has a 24" on it, That monitor is a little too light, It has a tendency to float back up to a natural high position. So be careful if you have a small or light monitor. This can be fixed easily though with some ballast around the end of the top arm where the vesa mount is (In the same way that the ballast works on the Elgato wave arm for light mics). Oh, also, those usb hub cables for the base are a gimicky load of crap. If you want usb extensions get a proper powered hub like the Sabrent 10 slot 60w or something. Previous to buying these I was using some of those cheaper vesa mounts that are basically a vertical pole with a swing arm attached. The ones on here for around twenty pounds each. You see them?.. yeah they suck hard compared to this. Don't be cheap like I was... You buy cheap, you buy twice. Do yourself a favour. Get these. You don't need to spend hundred on that fancy brand everyone creams over either. You're welcome. Enjoy your new mounts, you'll thank yourself when your desk looks twice as nice.

I bought this to use with my 2017 iMac when I switched to a standing desk for working from home [I needed to get a special adaptor to attach the iMac, also available on Amazon] I've been using it for a couple of months now and am very pleased with it. It was easy to assemble and permits movement in all directions, while feeling sufficiently robust. Looks good too.

Am really impressed with this monitor arm. Initially hesitant, but no need to worry. It holds my 34 inch ultra wide monitor with no issues. Mine came with 2 usb extension cables that plug into the stand to support the 2 usb ports built in. Can move the monitor around, adjust and lift without fuss. Key!! Don't adjust gas tension until you have the monitor mounted. This is more important if you release tension as you'll probably find it's too loose based on monitor weight. All in all good value and sturdy so far. Freed up much needed space. Have two people to set up to be on the safe side. Mine is clamped to the corner of my desk owing to a few constraints, still more than fit for the intended use.

It doesn’t hold my screen correctly

This an excellent piece of quality kit. A very sturdy arm which allows me to easily reposition my 32" monitor. Just follow the instructions and it is easy to assemble and set up the arm. There are cheaper ones out there but to ensure that it would cope with a 32" monitor I would highly recommend this one. Wish I had done this ages ago and save me the struggle of moving the large monitor on its stand every time I wanted a better view.

Dellの32インチのモニターに使用するのに購入、5000円しない商品で不安でしたが口コミを信じて購入しました。結果は満足しております。ちょくちょく動かすものでも無いので止めたいところでピタリ止まれば十分です。縦位置でもピタリ止まります。調整なしです。（ピタリの感じは人それぞれですが）耐久性は、まだ購入10日ぐらいなので星４つにしました。

facile da montare e da installare crea più spazio sulla scrivania

I bought this a couple of years ago, and although I moved it between a couple of tables while moving houses, it is still strong and is doing a good job.

It's an incitement of modern shopping and the user experience of amazon that this isn't the first thing you see when you browse monitor arms. Holy crap, this NB mount is great. I was looking for *any* reasonable monitor stand after replacing my old 27" AOC and this NB mount caught my eye as being a distinct product from a real-looking company. It had one job to do: provide a secure, height adjustable thing to hold my monitor. Manufacturing was flawless and nice industrial design. Instructions easy to follow though placed a little further back in the manual than expected (my one criticism). Assembly was easy and I was able to tension it perfectly (for 27" 7.7lb monitor). I'm not using the cable management channels at present but they're appreciated none the less. Operates perfectly, motion is smooth and easy without any feeling of instability or slack across component joints (each with a set screw). The monitor is secure and remains fixed in place with desk jostling, which is hugely impressive given the smooth+easy intentional movement. The balance is dead on. NB did a wonderful job building a monitor mount when they didn't need to put the care and attention to. The category is filled with slop that they could have fallen in line with. They didn't. They did the job right. So here's a glowing review to help humans who evidently care about their work, to do what I can to highlight industrial design done gloriously well, sold simply at an extremely reasonable price point. Amazon, show me more of this. Show me products with real thought and engineering put into them. Rest of y'all, buy this if in the need.

حلو وتركيبه سهل