Waterway Plastics Genesis Bath Pump Complete 7.5A 321HF10-0150

Super easy to install and it works great. I am very pleased

I chose this pump to replace a bathtub pump. Tub works as new. Easy replacement. Great seller and service. A++

Easy install!

This was a direct fit pump for my application. Easy install.

So far this replacement motor is working quite well for our jet tub not sure if it'll last as long as the original but doesn't seem to have much less power even though it says it has half the horsepower. It draws almost half the amperage of the original, which works out great for us because we run our house off solar and backup generator. We can now run our jacuzzi tub off the inverter instead of having to fire up the generator. all and all very happy with his so far.

Replacement for a 13-year-old Whirlpool Hydrabath tub pump, now obsolete. The Hydrabath model# was 605000UC-RS5, Chinese-made. This new pump is USA-made, and is 3/4 HP instead of the original 1/2 HP. The dimensional fit is the same at the fluid end; inlet and outlet hoses on the tub are 1-1/2" and terminate with hand-tight PVC Unions and underneath the tub the fit is tight - not much flexibility. But this pump fit right in almost perfectly, with very little shimming required. The electrical end is slightly longer, due to the bigger windings, more HP.Definitely saw the difference in pump output, the jets are circulating very strongly now. I cleaned up the male union fittings on the new pump to make sure they were absolutely smooth, and used vaseline on the female union O-rings to make sure I had a good tight seal. I left the tub full overnight after function-testing the new pump, just to hydro-test all the connections and ensure there are no leaks.Recommend and nice to buy USA-made equipment.

Product was delivered timely, box damaged, product damaged.

I expect that the unit works fine long term, I have installed this unit a few times as a replacement for customers and it worked well every time.A little advice from experience.. Almost all of the pumps that I have replaced were interchangeable for Whirlpool style jetted tubs. So the size of the motor usually is not that important. They all fire up strong. The only issue that I have run into is the size of the port openings. On one tub they were larger than the openings on this pump. It was on an older unit, and the openings were 2" instead of 1 1/2". I was able to get that pump working without replacing but you can find that pump if you look around. I have one of each as a backup for future repairs.(2" pump HB21000 Jacuzzi Bath Pump, w/Air Switch)