--- product_id: 515593369 title: "XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table" brand: "toauto" price: "$348.41" currency: USD in_stock: true reviews_count: 5 category: "Toauto" url: https://www.desertcart.us/products/515593369-xyz-3-axis-manual-linear-stage-60x60mm-trimming-bearing-tuning store_origin: US region: United States of America --- # XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table **Brand:** toauto **Price:** $348.41 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table by toauto - **How much does it cost?** $348.41 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.us](https://www.desertcart.us/products/515593369-xyz-3-axis-manual-linear-stage-60x60mm-trimming-bearing-tuning) ## Best For - toauto enthusiasts ## Why This Product - Trusted toauto brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description ParametersModel:LD60-LMTable size:60*60mm (2.36inch)Moving direction:X,Y, Z AxisTravel: XY:±6.5mm , Z: 10mmLoad:24.5N(3kgf)Material:AluminumMin Scale:0.01mmAccuracy:0.03mmParallelism:0.03mmNet Weight:0.75kgPackage includes:1pcs XYZ Axis LD60-LM Linear Stage Table Review: I needed to micro position some stuff in 3 dimensions for some microscopy work and this works great. Pay attention to the size and adjustability of the platform because for most uses it would be too small. Not as much info in the description as you'd like and there are no drawings or instructions, so you have to know what you are doing. For instance, loosen all three knurled nuts before turning the positioning dials. Also, both the top plate and bottom plate are 60x60x6mm (That is about 2 and 3/8 inches square for those of you that can't think metric). There are 9 threaded mounting holes on the top that accept 4mm screws. The screw holes are centered 5mm off the edge of the plate. The bottom plate has 4x4.45mm through-holes centered 5mm off the edge of the platform to accept 4mm socket-head screws. To access these holes you need to move the x-feed all the way in one direction, install the first 2 screws, then move the feed all the way in the other direction to install the remaining two. Hope this is helpful. as an aside, if you need to provide a leveling function it is fairly easy to use the threaded holes on top to make a micro leveling plate similar to a 3-d printer bed because 6 of the threaded holed can be accessed underneath --you can get knurled 4 mm screws and install them from underneath the top and they become micro levelers (there is a bit more to it if you want springs, etc, but if you care about this sort of thing you get the picture). Review: Only works on one direction. ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B07D7NM2WF | | Bearing Number | 3 | | Bearing Type | linear ball bearing | | Best Sellers Rank | 205,932 in Business, Industry & Science ( See Top 100 in Business, Industry & Science ) 3 in Lab Tables | | Brand | TOAUTO | | Compatible Lubricant | Grease | | Customer Reviews | 3.4 3.4 out of 5 stars (18) | | Item Thickness | 10 Millimetres | | Item Weight | 0.75 Kilograms | | Manufacturer | ToAuto | | Material | Aluminium | | UPC | 709046491154 | ## Product Details - **Bearing number:** 3 - **Brand:** TOAUTO - **Item thickness:** 10 Millimetres - **Item weight:** 0.75 Kilograms - **Material:** Aluminium ## Images ![XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table - Image 1](https://m.media-amazon.com/images/I/51AXbA9ykzL.jpg) ## Questions & Answers **Q: Are there 3d cad models available for download? i.e. step, igs or native solidworks** A: Please contact us via Amazon message to get its 3D file . **Q: Does this have a locking mechanism?** A: You can lock it by tightening the screws. Hard to lock real accurately however. **Q: How much force can this stage withstand?** A: 3.5 kg **Q: What is the thread pitch of the holes in the top of the stage?** A: The threaded holes in the top are M4-0.7 mm, with a 0.7 mm pitch. This is considered a coarse thread, and it is the most common pitch for M4 screws. I was never able to find this information anywhere and had to take a chance ordering some M4-0.7 mm screws, but can confirm that they do fit. No idea why it is so hard to get this information! ## Customer Reviews ### ⭐⭐⭐⭐⭐ Review *by D***D on 25 February 2021* I needed to micro position some stuff in 3 dimensions for some microscopy work and this works great. Pay attention to the size and adjustability of the platform because for most uses it would be too small. Not as much info in the description as you'd like and there are no drawings or instructions, so you have to know what you are doing. For instance, loosen all three knurled nuts before turning the positioning dials. Also, both the top plate and bottom plate are 60x60x6mm (That is about 2 and 3/8 inches square for those of you that can't think metric). There are 9 threaded mounting holes on the top that accept 4mm screws. The screw holes are centered 5mm off the edge of the plate. The bottom plate has 4x4.45mm through-holes centered 5mm off the edge of the platform to accept 4mm socket-head screws. To access these holes you need to move the x-feed all the way in one direction, install the first 2 screws, then move the feed all the way in the other direction to install the remaining two. Hope this is helpful. as an aside, if you need to provide a leveling function it is fairly easy to use the threaded holes on top to make a micro leveling plate similar to a 3-d printer bed because 6 of the threaded holed can be accessed underneath --you can get knurled 4 mm screws and install them from underneath the top and they become micro levelers (there is a bit more to it if you want springs, etc, but if you care about this sort of thing you get the picture). ### ⭐ Review *by M***Z on 26 November 2025* Only works on one direction. ### ⭐⭐⭐⭐⭐ Review *by H***N on 27 April 2023* Great stage for the price. See the images in the description for details on the dimensions The base of the stage has 2 x 2 holes spaced 50 mm apart in a square pattern. 4.5mm thru holes with a 7.9mm countersunk head in the top. The bottom plate is 6.9mm thick. M4x8 was perfect. Top plate is a set of 3 x 3 holes 25mm spaced apart. square layout. M4 threading. ## Frequently Bought Together - XYZ 3 Axis Manual Linear Stage 60x60mm Trimming Bearing Tuning Platform Sliding Table - Precision XYZR 4 Axis 2.36"x2.36" Manual Linear Positioning Stage Bearing Tuning Platform Sliding Table 60x60mm - XYZ Axis Manual Precision Linear Stage 40x40mm Trimming Bearing Tuning Platform Sliding Table --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.us/products/515593369-xyz-3-axis-manual-linear-stage-60x60mm-trimming-bearing-tuning](https://www.desertcart.us/products/515593369-xyz-3-axis-manual-linear-stage-60x60mm-trimming-bearing-tuning) --- *Product available on Desertcart United States of America* *Store origin: US* *Last updated: 2026-05-19*