• *Prestige Paints has created a comparable color based on color specifications of the original color using industry leading technology..
• *This Sherwin Williams paint color name is a trademark of Sherwin Williams. Prestige Paints is not associated or affiliated with Sherwin Williams in any way..
• High hiding formula for excellent coverage with smooth application.
• 100% Acrylic latex paint for easy soap and water clean-up.
• Low VOC: less than 50 g/L 0. 42 lbs./gal. prior to tinting.

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint intended to be used on exterior surfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: when painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp. ) surface Preparation: remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. PRIME all bare, new wood and factory primed wood with an oil base primer. PRIME masonry surfaces including cementitious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 c). average coverage 400 sq. Ft. (37 square meters) per gallon (3. 78 L). for best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry time: Dries in 1 to 2 hours. Allow to dry overnight before coating. Low temperature or high humidity may increase dry time. Cleanup: use warm water and soap. A semi-gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. *Prestige paints uses proprietary base paints and tints to create and match colors. Prestige Paints works with industry leaders in paint color to match the color on this page based on the color specifications of the original to create a comparable color. Prestige Paints is not offering the ACTUAL branded color or paint product for sale and is not associated or affiliated with the color-referenced brand. Prestige Paints reference to any trademark is for color comparison only. Actual paint colors may vary from on-screen and printer representation. Note that color can vary due to sheen, light, surface, and application method.