---
product_id: 41691654
title: "Filabot TCG1 Taulman Clear t-glase Filament, 1.75 mm, Green"
brand: "filabot"
price: "$9.92"
currency: USD
in_stock: false
reviews_count: 5
category: "BISS"
url: https://www.desertcart.us/products/41691654-filabot-tcg1-taulman-clear-t-glase-filament-1-75-mm
store_origin: US
region: United States of America
---

# Filabot TCG1 Taulman Clear t-glase Filament, 1.75 mm, Green

**Brand:** filabot
**Price:** $9.92
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Filabot TCG1 Taulman Clear t-glase Filament, 1.75 mm, Green by filabot
- **How much does it cost?** $9.92 with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.us](https://www.desertcart.us/products/41691654-filabot-tcg1-taulman-clear-t-glase-filament-1-75-mm)

## Best For

- filabot enthusiasts

## Why This Product

- Trusted filabot brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Color:Green




























Taulman t-glase (Tee Glass) is a PETT filament that is perfectly clear, with super low shrink properties and a very strong part when finished. Prints at slightly lower than ABS temps and sticks exceptionally well to even un-heated surfaces. This filament can be used on printers that do not have a headed bed.

## Features

- 1.75mm
- Green
- Prints on Un-heated Bed

## Images

![Filabot TCG1 Taulman Clear t-glase Filament, 1.75 mm, Green - Image 1](https://m.media-amazon.com/images/I/51ItL2hOdQL.jpg)

## Available Options

This product comes in different **Color** options.

## Customer Reviews

### ⭐ 







  
  
    I don't think this is the real stuff
  

*by A***N on Reviewed in the United States on July 17, 2019*

I bought four pounds of this at the Midwest RepRap Festival and have printed about two pounds of it the last week making flowers and vases for an event.  I ran out of clear and purchased this to keep printing flowers but it is acting completely different.* Spool is not as pictured.  My original spools looked like the picture.* It doesn't look as clear on the spool* It won't extrude at the same temps as the other four spools (must add at least 20 degrees)* It puts out about six times the particulate into the air vs my known good spools* It is jamming more frequently.  The original stuff would make some ugly prints until I had it dialed in but it would finish printing.  This stuff keeps jamming on me.  Waiting for the air to clear up after every failure is also a pain.I have air quality sensors that monitor pm2.5 and pm10 in my printer cabinets and around my house.  For the past six weeks (which includes several pounds of known good t-glase being printed) my I haven't breached 20 pm2.5 or pm10 originating from my printer cabinets.  In the same graph I'm getting above 128 pm2.5 and 167 pm10 coming from the printer I'm reading this from.  That's a rolling 15 minute average of readings every three minutes.  The instantaneous readings breached 400.  The high readings in of itself isn't an issue since I built this setup to print some nasty materials.  The issue I have is this doesn't seem to be the same plastic.

### ⭐⭐⭐⭐ 







  
  
    I would love to use this filament
  

*by L***S on Reviewed in the United States on September 22, 2016*

Update:I emailed Taulman about the issue and within a few hours he was shipping me a replacement spool. The replacement spool is of great quality and works great. I tested the filament over a few meters with a micrometers and found diameters varying from 1.750 mm to 1.725 mm, well within an acceptable range for great quality prints. I'm very glad to see Taulman has such great customer service and am changing my rating in light of this. My original review is below.Original 2 Star Review:I did some test prints with this filament and if you set up the layer heights right you can get some really neat clear prints. Unfortunately the thickness of this filament varies wildly, using a set of digital mics I was able to get measurements anywhere from 1.715 mm to 1.825 mm all within an meter or two. This has caused lots of issues in getting the extrusion rate calibrated properly so as not to produce holes and also has caused excessive issues with jamming to the point where I can't finish a print that takes over 30 min because it will likely jam. I would love to use this filament, unfortunately the diameter of mine varies far too much.

### ⭐⭐ 







  
  
    Looked promising but didn't work for me
  

*by D***N on Reviewed in the United States on February 18, 2019*

It's a beautiful looking clear filament when on the spool. So I tried the printer settings recommended by Taulman, tried settings used by other people who've been successful with this filament, used a 1mm nozzle, over-extruded, thick layer heights, etc. The first layer always looked great but everything after that was a mess.  I never got the thick clear strands other people got. Turned the heat up and it bubbled like crazy, turned it down and the layers didn't adhere to each other. Tried different nozzle sizes, layer heights, hotend temperatures, no luck. Best I got was a stringy looking print with 0.2mm layers, but at that layer height it's not transparent. And $30+ for half a roll? Ended up returning it.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.us/products/41691654-filabot-tcg1-taulman-clear-t-glase-filament-1-75-mm](https://www.desertcart.us/products/41691654-filabot-tcg1-taulman-clear-t-glase-filament-1-75-mm)

---

*Product available on Desertcart United States of America*
*Store origin: US*
*Last updated: 2026-02-25*