Ingersoll Rand2145QiMAX-6 3/4" Air Impact Wrench, Quiet, 1700 ft-lbs Nut-busting Torque, Maintenance Duty, Pistol Grip, 6" Extended Anvil

Bought this Ingersoll Rand 3/4" impact before an upcoming job, knowing we were going to need more than the 1/2" drives we all carry on our trucks. This impact made short work of the over 300 nuts and bolts that we were removing and replacing during the project. We were working with a variety of nut sizes up to 2" and torqued to over 700 ft lbs. This impact removed the nuts easily and worked flawlessly during the entire project. We had another older model Ingersoll Rand 3/4" impact that need a little more effort to get broken loose but this new model didn't hesitate. Was very happy with the feel and quality of the tool. We were working off a truck mounted PTO setup running around 90 PSIG. The tool never seemed like it was struggling for air and had plenty of power. Would buy again in a heartbeat.

I have used Ingersoll rand products for a long time. Has plenty of power and actually pretty comfortable to use. Down side is that IRS other products are suffering from poor design, specifically their 1/2 in. drive impacts and angle grinders…..triggers should be made of other material than plastic.UPDATE…. I work in the heavy duty truck industry. I used this gun exactly 3 times and now it just blows air(something broke in the anvil system). 2000 ft lbs???….never last to reach it. I guess the quality went down on these as well. I purchased an Aircat to replace it. They (AIRCAT) have their s**t together.

So I use this almost daily in a diesel shop and you have to have a high pressure and large air compressor to run this efficiently… that being said this will break most bolts lugs and just about and thing the can take a socket free it’s a rare occurrence that I have to get the 1in drive impact out so this to me is worth the price just make sure your compressor can handle it

This tool meets expectations

The brand name should say it all very good impact.

This just replaced my snapon 3/4. It hits harder and not near as loud. Very impressed so far. Completely under carriage on D6 no problem.

Easily remove semi lugs and solid built.

there is no way this has 1,350 LBS of torque, not even close. It will not remove the lugs from my 10k axle and i know those lugs are tightened to approx 450 Ft/lbs , not worth the $$

Fast shipping. Lots of torque. And is very quite for a gun that size.

What can I say, the brand name says it all. Don't waste your money on never heard of tools. You want a powerful quality gun, get this tool. Keep it greased and use air tool oil every use.

When I use gun it’s not open the bolts

Compre esta pistola de 3/4 para apretar las tornillos que no pudiera mi pistola de impacto de batería 1/2 y puede más mi pistola de batería. Al final me toca apretar con la mano. Lo uso con un compresor de 100 litros, no se si tendrá algo que ver el compresor que es pequeño. Luego el marcador que te indica si se usa con más presión o menos, no se mueve del mínimo. Lo trabajo con 9 de bar y a ponerlo en marcha se pone en 6

Im a truck mechanic. This thing works awesome..light weight, quiet... delivered to my place in less than 2 days. Very Happy...